Home
Главная
Nobelic
Ip-Камера
NBLC-4204Z-SD
Инструкция по эксплуатации Страница: 6

Nobelic NBLC-4204Z-SD [6/20] Fcc information

Important safeguards and warnings

ELECTRICAL SAFETY

All installation and operation here should meet your

local electrical safety codes. Please check if the

power supply is correct before operating the device.

The power should conform to the SELV require-

ment (Safety Extra Low Voltage), and the power

supply should be rated 12V DC, 5V DC, or 24V AC

following the IEC60950-1 standard. (For the

power supply requirement, see the device label).

Before installing wiring, please install an easy-to-

use device for emergency power shutoff.

Please make sure the cord (especially the plug

and power socket) is not stepped on or impinged.

Note: If you are already supplying power to the

device through the PoE input, you should not addi-

tionally provide power through the dedicated

power input. It could result in damage to the device!

We assume no liability or responsibility for any

fires or electrical shock caused by improper han-

dling or installation.

We are not liable for any problems caused by un-

authorized modification or repair attempts.

ENVIRONMENT

Please don’t aim the device at a strong light

source (such as lighting or sunlight) when focus-

ing; this could cause overexposure. This is not a

device malfunction, but it will affect the longevity

of the CCD or CMOS.

Please transport, use, and store the device within

the allowed range of humidity and temperature.

Please don’t keep the device in a place that is wet,

dusty, extremely hot, or extremely cold; don’t

expose it to strong electromagnetic fields or un-

stable lighting.

In order to protect the camera’s internal compo-

nents, please do not allow water or other liquids

to enter its housing.

Please do not allow rain or dampness to reach the

device, as sparking or fire could result.

Please maintain good ventilation, to allow any

excess heat to dissipate.

When transporting the device, please pack it in its

original packaging or with packing of equal quality.

During transportation, storage, and installation,

protect it from heavy stress or vibrations, and

from water.

OPERATION AND REGULAR MAINTENANCE

Please do not touch the device’s heat-dissipation

component directly, in order to avoid getting burned.

Please do not dismantle the device. None of its

components can be repaired by users. If the device

is opened by someone other than a trained pro-

fessional, this may cause water leakage or bad

image quality.

You should use the device with a lightning-pro-

tection system.

You should ensure that the power plug’s ground

prong is connected to a properly grounded outlet,

to ensure the camera’s reliability.

Do not touch the CCD (CMOS) optical component

directly. You can use a blower to clean dust or dirt

from the lens surface. If cleaning is necessary,

please use a dry cloth wetted with alcohol to

gently wipe away any dust.

Always use a soft, dry cloth to clean the device. If

there is too much dust, please clean the device

with mild detergent diluted with water. Afterwards,

wipe the device off with a dry cloth. Don’t use vol-

atile solvents such as alcohol, benzene, or thinner,

or strong abrasive detergent, or it will damage the

surface coating or impair the device’s performance.

The dome cover is an optical device. Please don’t

touch or wipe the cover surface directly during

installation and use. If it gets dirty, please use the

following methods:

Dirt stains: use a soft, oil-free brush or a hair

dryer to remove it gently.

Grease stains or fingerprints: use a soft cloth to

gently wipe away water drops or oil until it’s

dry, then use an oil-free cotton cloth, or paper

soaked with alcohol or detergent, to wipe the

lens from the center outward. If it’s still not

clean enough, you can change the cloth and

wipe several times.

WARNING

Please use the standard accessories provided by

the manufacturer, and make sure the device is in-

stalled and fixed by professionals.

Please do not allow the device’s surface to be

touched by any laser beam.

If you are already supplying power to the device

through the PoE input, you should not additional-

ly provide power through the dedicated power

input. It could result in damage to the device!

STATEMENT

Please refer to the actual product for more de-

tails; the manual is just for reference.

The manual will be regularly updated based on

product updates. Updated content will be added

to the manual without prior announcement.

Please contact the supplier or customer service if

any problem occurs when using the device.

Please contact customer service for the latest

procedures and supplementary documentation.

The device may function somewhat differently

from what is stated in the manual if its environ-

ment is not stable or if precautions are not heeded.

If in doubt, you may contact customer service.

The company is not liable for any loss caused by

use contrary to the manual’s advice.

FCC information

FCC CONDITIONS

This device complies with FCC Part 15. Operation

is subject to the following two conditions:

This device must not cause harmful interference.

This device must accept any interference re-

ceived, including interference that may cause

undesired operation.

FCC COMPLIANCE

This equipment has been tested and found to

comply with the limits for a digital device, pursu-

ant to FCC Part 15. These limits are designed to

provide reasonable protection against harmful in-

terference. This equipment generates, uses, and

can radiate radio-frequency energy and, if not in-

stalled and used in accordance with the instruc-

tion manual, may cause harmful interference to

radio communication. However, there is no guar-

antee that interference will not occur in a partic-

ular installation. If this equipment does cause

harmful interference to radio or television recep-

tion (which can be determined by turning the

equipment off and on), the user is encouraged to

try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment to an outlet on a circuit dif-

ferent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

Note: Before installation, please open the package

and make sure that all the components are pres-

ent. Contact your local retailer immediately if

something is broken in your package.

8 9

NBLC-4204Z-SD NBLC-4204Z-SD

Nobelic NBLC-4204Z-SD [6/20] Fcc information

Содержание

Похожие устройства