SENA SMH5 [21/38] Using the smh5

Loosen the two screws on the back plate of the clamp using the enclosed allen wrench insert the back plate of the clamp unit between the internal padding and external shell of the helmet and tighten the two screws 7

Powering on off and charging 10

Checking the battery level 11

Pairing the smh5 with bluetooth devices 12

Gps pairing as mobile phone if gps is not only used for turn by turn voice instructions but also is your preferred bluetooth stereo music source you can pair the gps to the smh5 by following the simple procedures in 6 mobile phone pairing when you do this the smh5 thinks the gps is a mobile phone but the smh5 can directly pair an additional mobile phone 14

The gps confirms that pairing has completed and the smh5 is ready to use you will hear a voice prompt from the smh5 saying your headset is paired 6 if the pairing process is not completed within three minutes the smh5 will return to stand by mode 14

The pairing diagram for multipoint gps pairing is shown in the figure below 14

You have to use a motorcycle specific gps which transmits turn by turn voice instruction to the headset by bluetooth most automotive gps systems don t have this feature 14

Pairing with selective profile a2dp stereo or handsfree 15

Pairing with other smh5 headsets for intercom conversation 16

Pairing with other sena headset models for intercom conversation 17

Configuration setting 18

Delete all bluetooth pairing information 20

Enabling disabling advanced noise control 20

Enabling disabling sidetone 20

Exitvoiceconfigurationmenu 20

If you use your smh5 with the bluetooth audio pack for gopro or prism you can enable or disable this feature only during normal audio recording mode this feature is automatically disabled while in ultra hd uhd audio mode 20

Sidetone is the sound of your own voice as picked up by your headset s microphone and reproduced in your own ear by your own speaker it helps you to naturally speak at the correct level according to varying helmet noise conditions if this feature is enabled you can hear what you are speaking during an intercom conversation or a phone call 20

To delete all bluetooth pairing information of the smh5 rotate the jog dial until you hear a voice prompt saying delete all pairings and tap the phone button to confirm tapping the jog dial is not available for this setting 20

To exit voice configuration menu and get back to stand by mode rotate the jog dial until you hear a voice prompt saying exit 20

Voice prompts for factory reset 20

When advanced noise control is enabled the background noise is reduced during an intercom conversation when it is disabled the background noise is mixed with your voice during intercom 20

Configuration and tap the phone button to confirm tapping the jog dial is not available for this setting 21

Mobile phone call making and answering 1 when you have an incoming call simply tap the jog dial or the phone button to answer the call 2 you can also answer the incoming call by loudly speaking any word of your choice if voice activated phone answering is enabled refer to the next section for details 3 to end a call tap the jog dial or the phone button or wait for the called person to end the call 4 to reject a call press the jog dial for 2 seconds until you hear a beep while the phone is ringing 21

Using the smh5 21

Voice configuration menu button operations 21

Volume adjustment you can easily adjust the volume by rotating the jog dial you will hear a beep when the volume reaches maximum or minimum level the volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset for example once you set the volume for mobile phone handsfree it will not change even if you adjust the volume when you hear bluetooth mp3 music so you can always maintain the preferred optimum volume level for each audio source 21

If you want to exit the speed dial immediately rotate the jog dial until you hear a voice prompt saying cancel and tap the phone button or the jog dial if any button is not pressed within 15 seconds the smh5 will exit the voice speed dial menu and goes back to stand by mode 23

Intercom conversation 1 you can start an intercom conversation with any of intercom friends by tapping the jog dial single tapping to intercom with the first intercom friend double tapping with the second intercom friend and triple tapping with the third intercom friend 23

Intercom friend 23

Mobile phone call button operations 23

Universal intercom 27

Firmware upgrade 28

Operation quick reference 29

Ce declaration of conformity 30

Certification and safety approvals 30

Fcc caution 30

Fcc compliance statement 30

Fcc rf exposure statement 30

Www sena co 30

Bluetooth license 31

Industry canada statement 31

Weee waste electrical and electronic equipment 31

Product storage and management 32

Product use 32

Safety information 32

Battery 33

Limited warranty 34

Product warranty and disclaimer 34

Warranty exclusions 35

Warranty service 37

SENA SMH5 [21/38] Using the smh5

Содержание

Похожие устройства