![SENA SMH5 Инструкция по эксплуатации онлайн [9/38] 495200](/img/pdf.png)
SENA SMH5 Инструкция по эксплуатации онлайн [9/38] 495200
![SENA SMH5 Инструкция по эксплуатации онлайн [9/38] 495200](/views2/1620827/page9/bg9.png)
English
SMH5
9
In the case of the wired microphone included in the “Full-face
Helmet Kit”, attach the enclosed hook and loop fastener for wired
microphone to the inside of the chin guard for full-face helmets.
Place the wired microphone on the hook and loop fastener and
attach it to the connector of the speaker cable.
6. When you use the boom microphone included in the “Basic Kit”,
please make sure that the n side of the microphone is facing
outward; away from your lips. You can easily recognize it by
touching the n with your ngers.
n
7. To remove the headset main unit from the clamp, please make sure
to pull out the speaker cable connector from the main unit rst.
Then, remove the main unit from the clamp.
Содержание
- User s guide 1
- Www sena com 1
- Checking the battery level 1 3
- Configuration setting 8 3
- Contents 3
- Installing the smh5 on your helmet 3
- Introduction 3
- Package contents 3
- Pairing the smh5 with bluetooth devices 2 3
- Pairing with other sena headset models for intercom conversation 7 3
- Pairing with other smh5 headsets for intercom conversation 6 3
- Pairing with selective profile a2dp stereo or handsfree 5 3
- Powering on off and charging 0 3
- Certification and safety approvals 0 4
- Firmware upgrade 8 4
- Operation quick reference 9 4
- Product warranty and disclaimer 4 4
- Safety information 2 4
- Universal intercom 7 4
- Using the smh5 1 4
- Introduction 5
- Basic kit 6
- Headset main unit 6
- Microphone 6
- Package contents 6
- Full face helmet kit 7
- Insert 7
- Installing the smh5 on your helmet 7
- Loosen the two screws on the back plate of the clamp using the enclosed allen wrench insert the back plate of the clamp unit between the internal padding and external shell of the helmet and tighten the two screws 7
- Powering on off and charging 10
- Checking the battery level 11
- Pairing the smh5 with bluetooth devices 12
- Gps pairing as mobile phone if gps is not only used for turn by turn voice instructions but also is your preferred bluetooth stereo music source you can pair the gps to the smh5 by following the simple procedures in 6 mobile phone pairing when you do this the smh5 thinks the gps is a mobile phone but the smh5 can directly pair an additional mobile phone 14
- The gps confirms that pairing has completed and the smh5 is ready to use you will hear a voice prompt from the smh5 saying your headset is paired 6 if the pairing process is not completed within three minutes the smh5 will return to stand by mode 14
- The pairing diagram for multipoint gps pairing is shown in the figure below 14
- You have to use a motorcycle specific gps which transmits turn by turn voice instruction to the headset by bluetooth most automotive gps systems don t have this feature 14
- Pairing with selective profile a2dp stereo or handsfree 15
- Pairing with other smh5 headsets for intercom conversation 16
- Pairing with other sena headset models for intercom conversation 17
- Configuration setting 18
- Delete all bluetooth pairing information 20
- Enabling disabling advanced noise control 20
- Enabling disabling sidetone 20
- Exitvoiceconfigurationmenu 20
- If you use your smh5 with the bluetooth audio pack for gopro or prism you can enable or disable this feature only during normal audio recording mode this feature is automatically disabled while in ultra hd uhd audio mode 20
- Sidetone is the sound of your own voice as picked up by your headset s microphone and reproduced in your own ear by your own speaker it helps you to naturally speak at the correct level according to varying helmet noise conditions if this feature is enabled you can hear what you are speaking during an intercom conversation or a phone call 20
- To delete all bluetooth pairing information of the smh5 rotate the jog dial until you hear a voice prompt saying delete all pairings and tap the phone button to confirm tapping the jog dial is not available for this setting 20
- To exit voice configuration menu and get back to stand by mode rotate the jog dial until you hear a voice prompt saying exit 20
- Voice prompts for factory reset 20
- When advanced noise control is enabled the background noise is reduced during an intercom conversation when it is disabled the background noise is mixed with your voice during intercom 20
- Configuration and tap the phone button to confirm tapping the jog dial is not available for this setting 21
- Mobile phone call making and answering 1 when you have an incoming call simply tap the jog dial or the phone button to answer the call 2 you can also answer the incoming call by loudly speaking any word of your choice if voice activated phone answering is enabled refer to the next section for details 3 to end a call tap the jog dial or the phone button or wait for the called person to end the call 4 to reject a call press the jog dial for 2 seconds until you hear a beep while the phone is ringing 21
- Using the smh5 21
- Voice configuration menu button operations 21
- Volume adjustment you can easily adjust the volume by rotating the jog dial you will hear a beep when the volume reaches maximum or minimum level the volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset for example once you set the volume for mobile phone handsfree it will not change even if you adjust the volume when you hear bluetooth mp3 music so you can always maintain the preferred optimum volume level for each audio source 21
- If you want to exit the speed dial immediately rotate the jog dial until you hear a voice prompt saying cancel and tap the phone button or the jog dial if any button is not pressed within 15 seconds the smh5 will exit the voice speed dial menu and goes back to stand by mode 23
- Intercom conversation 1 you can start an intercom conversation with any of intercom friends by tapping the jog dial single tapping to intercom with the first intercom friend double tapping with the second intercom friend and triple tapping with the third intercom friend 23
- Intercom friend 23
- Mobile phone call button operations 23
- Universal intercom 27
- Firmware upgrade 28
- Operation quick reference 29
- Ce declaration of conformity 30
- Certification and safety approvals 30
- Fcc caution 30
- Fcc compliance statement 30
- Fcc rf exposure statement 30
- Www sena co 30
- Bluetooth license 31
- Industry canada statement 31
- Weee waste electrical and electronic equipment 31
- Product storage and management 32
- Product use 32
- Safety information 32
- Battery 33
- Limited warranty 34
- Product warranty and disclaimer 34
- Warranty exclusions 35
- Warranty service 37
Похожие устройства
- SENA SPH10H-FM Quick start guide
- SENA SPH10H-FM Инструкция по эксплуатации
- SENA SMH5-MultiCom Quick start guide
- SENA SMH5-MultiCom Инструкция по эксплуатации
- SENA SF1 Quick start guide
- SENA SF1 Инструкция по эксплуатации
- ERGO NL-430 Инструкция по эксплуатации
- ERGO NL-610 Инструкция по эксплуатации
- ERGO NL-620 Инструкция по эксплуатации
- ERGO NL-630 Инструкция по эксплуатации
- ERGO NL-640 Инструкция по эксплуатации
- ERGO NL-650 Инструкция по эксплуатации
- ERGO NL-710 Инструкция по эксплуатации
- ERGO NL-720 Инструкция по эксплуатации
- ERGO NL-730 Инструкция по эксплуатации
- ERGO NL-750 Инструкция по эксплуатации
- ERGO NL-780 Инструкция по эксплуатации
- ERGO NL-850 Инструкция по эксплуатации
- ERGO NL-880 Инструкция по эксплуатации
- ERGO S-2049 Инструкция по эксплуатации