SENA SPH10H-FM [19/62] Sph10h fm configuration setting

English

SPH10H-FM

SPH10H-FM CONFIGURATION

SETTING

YoucansetthecongurationoftheSPH10H-FMbythe

voice menu instruction as below.

1.To enter into voice conguration menu, press and

hold the Jog Dial for 12 seconds until the LED shows

solid blue and you hear high tone double beeps. You

will also hear a voice prompt saying “Conguration

menu”.

2. Rotate the Jog Dial clockwise or counter-clockwise

to navigate between the menus. You will hear voice

prompts for each menu items as below.

3. You can enable the feature or execute the command

by tapping the Phone Button, or disable the feature by

tapping the Jog Dial.

4. If any button is not pressed within 10 seconds, the

SPH10H-FMwillexitthecongurationandgoesback

to stand-by.

5.Ifyouwanttoexitthecongurationimmediately,rotate

the Jog Dial until you hear a voice prompt, “Exit

conguration”, and tap the Phone Button.

The voice prompt for each menu item is as below:

(1) Speed dial (6) Sidetone

(2) VOX phone (7) Noise control

(3) VOX intercom (8) Delete all pairings

(4) Voice prompt (9) Exit conguration

(5) RDS AF setting

Exit configuration VOX phone

VOX intercom

Delete all pairings

Voice prompt

RDS AF settingSidetone

Noise control

Speed dial

9.1 Assigning Speed Dial

Voice Prompt

“Speed dial”

Factory Default N/A

Execute Tap the Phone Button

1. To assign a phone number as a speed dial, rotate

the Jog Dial until you hear a voice prompt saying

“Speed dial”.