SENA SPH10H-FM [41/62] Reset to factory default settings

English

SPH10H-FM

6. To stop scan function, double tap the Phone Button.

21.5 Temporary Preset

With the temporary preset function, you may

temporarily preset stations automatically without

changing the existing preset stations. Tap the Phone

Button three times which will automatically scan for

10 temporary preset stations. The temporary preset

stations will be cleared when the system is powered

off.

21.6 Region Selection

You can select proper FM frequency region from

Sena device manager. With the region setting, you

may optimize seek function to avoid unnecessary

frequency range (Factory default: worldwide).

Region Frequency Range Step

Worldwide 76.0~108.0MHz ± 100 kHz

Americas 87.5~107.9MHz ± 200 kHz

Asia 87.5~108.0MHz ± 100 kHz

Australia 87.5~107.9MHz ± 200 kHz

Europe 87.5~108.0MHz ± 100 kHz

Japan 76.0~95.0MHz ± 100 kHz

22. RESET TO FACTORY DEFAULT

SETTINGS

1. To restore the SPH10H-FM to factory default

settings, press and hold the Phone Button for 12

seconds until the LED shows solid red and you

hear double beeps. You will hear a voice prompt

saying “Factory reset”.

2.Within 5 seconds, press the Jog Dial to conrm

reset. The headset will be restored to factory

setting and switched off automatically. You will

hear a voice prompt saying “Headset reset,

good-bye”.

3. If you don’t press the Jog Dial within 5 seconds,

the reset attempt is canceled and the headset

returns to stand-by mode. You will hear a voice

prompt saying, “Canceled”.