Timberk TCH AB8 2000 [6/24] Troubleshooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk TCH AB8 2000 [6/24] Troubleshooting

Timberk TCH AB8 800 [6/24] Troubleshooting
www.timberk.com • electric ceiling heater
6
1. Before switching the heater, it is necessary to thoroughly wipe the
surface of the radiating boards first with a soft rag moistened in alcohol
and then with a dry rag in order to exclude appearance of burnt spots.
2. After switching and reaching the working mode, the appliance starts to
radiate infrared beams and heat the surrounding objects/bodies.
3. To exclude unpleasant burnt odor, it is recommended to keep the heater
clean preventing accumulation of dust on it.
4.Within a few minutes after turning the heater on, the heating element
may have black dots. This is normal and does not affect the operation of
the device.
5. It is not recommended to look at the heating element for a long time it
can cause visual impairment.
Possible malfunctions and remedies for them:
1. During operation, it is necessary to periodically (once a year) check the
electric cable contacts and terminal connectors for good tightening.
2. If the body becomes dirty, wipe off dust with a towelette. Radiating
boards should be wiped in cold condition with alcohol.
7. OPERATION
10. TROUBLESHOOTING
8. MAINTENANCE
NOTE:
Discoloration of paint on the heater body wall directed
to the ceiling during operation is not a defect. Changing
of colour for heating plates is not defect.
NOTE:
Radiating boards should be wiped with a soft rag
moistened in alcohol leaving no scratches on the
surface. Use of other liquids is prohibited!
WARNING!
Slight crackles may be heard during operation at the
moment of heating or cooling, which disappear, when
the heater reaches the working mode which is not a
malfunction.
Malfunction Cause Remedy
1. The heater heats
poorly
1. The heating element is faulty
1. Contact the authorized service center of
Timberk
2. Low voltage in the electric mains 2. Check voltage in the electric mains
2. The heater does
not work
1. No voltage in the electric mains 1. Check presence of voltage in the electric mains
2. Breakdown of the electric cable
2. Check integrity of the electric cable and replace
it if necessary
3. The automatic circuit breaker of the
electric mains is faulty
3. Check operability of the automatic circuit
breaker of the electric mains and replace the
faulty circuit breaker if necessary
4. Breakdown in the heating element circuit
4. Contact the authorized service center of
Timberk
9. TRANSPORTATION AND STORAGE
1. The device in the manufacturer’s packaging can be transported to any
distance by all types of closed transport at temperatures from -50 °С to +50
°C and relative humidity up to 80 % (at air temperature +25 °C) in accordance
with the transportation rules goods operating on this type of transport.
2. When transporting, any impact and movement of the package inside the
vehicle is unacceptable.
3. The packed device should be stored in covered ventilated rooms at an
air temperature of -10 °C to +50 °C at a relative humidity of up to 80 % (at
air temperature +25 °C). The room should not have aggressive impurities
causing corrosion.
4. When transporting and storing, strict adherence to manipulation marks
on the packaging device.

Содержание

Похожие устройства

Скачать