Greenworks G40LTK3 (2101507UE) [23/292] Problem identification

EN - 12

12. PROBLEM IDENTIFICATION

PROBLEM PROBABLE CAUSE REMEDY

1. No start

Battery is not inserted or is inserted

incorrectly

Check that the battery is correctly inserted

Overload protection activated Wait a few seconds for automatic reset.

The auger is on and the motor cannot start. Immediately release the start

control and remove the obstacle.

Try and switch on again.

2. The motor barely rotates

Auger or discharge chute

obstructed, blocked by obstacles or

damaged.

Clean the auger and chute. Remove any

dirt or foreign bodies. Replace if damaged.

The capacitor is faulty. Call assistance or the dealer.

3. The motor stops

suddenly

Electric part malfunction Call assistance or the dealer.

Overload protection activated Wait 10 minutes and try again.

4. Excessive vibrations

Loose parts or auger or rotor damaged. Tighten all the fastening devices.

Replace the damaged parts in the

authorised assistance centre.

Handle not correctly positioned. Ensure the handle is

fastened in its position.

5. Loss or slowing of

thrown snow

Blocked discharge chute. Clean the discharge chute.

Auger blocked. Remove any dirt or foreign

bodies from the auger.

6. The snow thrower

leaves a light layer of

snow on the ground

Auger blade worn Contact the authorised assistance centre.

If problems persist after having performed the above operations, contact your dealer.