Home
Главная
Bosch
Сабельная Пила
06033B2401
Инструкция по эксплуатации Страница: 13

Bosch 06033B2401 [13/199] Safety information for sabre saws

Safety information for sabre saws

u Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting ac-

cessory may contact hidden wiring. Cutting accessory

contacting a "live" wire may make exposed metal parts of

the power tool "live" and could give the operator an elec-

tric shock.

u Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the workpiece by hand or against your body leaves it un-

stable and may lead to loss of control.

u Keep hands away from the sawing area. Do not reach

under the workpiece. Contact with the saw blade can

lead to injuries.

u Hold the power tool firmly with both hands and make

sure you have a stable footing. The power tool can be

more securely guided with both hands.

u Only bring the power tool into contact with the work-

piece when switched on. Otherwise there is danger of

kickback if the cutting tool jams in the workpiece.

u Ensure that the footplate is always resting on the

workpiece while sawing. The saw blade can jam and

lead to loss of control over the power tool.

u When the cut is completed, switch off the power tool

and then pull the saw blade out of the cut only after it

has come to a standstill. In this manner you can avoid

kickback and can place down the power tool securely.

u Always wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

u Use only undamaged saw blades that are in perfect

condition. Bent or dull saw blades can break, negatively

influence the cut, or lead to kickback.

u Do not brake the saw blade to a stop by applying side

pressure after switching off. The saw blade can be dam-

aged, break or cause kickback.

u Ensure that the material is securely clamped. Do not

support the workpiece using your hands or feet. Do

not touch any objects or the floor with the saw while it

is running. There is a risk of kickback.

u Use suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

u In case of damage and improper use of the battery, va-

pours may be emitted. Ensure the area is well-ventilated

and seek medical attention should you experience any ad-

verse effects. The vapours may irritate the respiratory

system.

u Do not open the battery. There is a risk of short-circuit-

ing.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g.

against continuous intense sunlight, fire,

water, and moisture. There is a risk of explo-

sion.

Wear hearing protection. Exposure to noise

can cause hearing loss.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is suitable for sawing wood, plastic, metal

and building materials on a firm surface. It is suitable for

straight and curved cuts. When using designated suitable bi-

metal saw blades, flush cutting is also possible. The saw

blade recommendations are to be observed.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Saw blade

(2)

Base plate

(3)

Saw blade receptacle

(4)

Locking sleeve for saw blade

(5)

Battery charge indicator

(6)

On/off switch

(7)

Lock-off button for on/off switch

(8)

Battery

(9)

Handle (insulated gripping surface)

(10)

Battery release button

Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical data

Reciprocating saw AdvancedRecip 18

Article number

3 603 CB2 4..

Stroke rate control ●

Rated voltage V= 18

No-load stroke rate n

min

–1

0–3100

English | 13

Bosch Power Tools 1 609 92A 4JX | (01.10.2018)

Bosch 06033B2401 [13/199] Safety information for sabre saws

Содержание

Похожие устройства