Condtrol GFX200 [3/21] Gfx 200 gfx 300 gfx 360 gfx 36

Condtrol GFX200 [3/21] Gfx 200 gfx 300 gfx 360 gfx 36
4 5
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
Congratulations on your purchase of laser levels GFX 200/GFX 300/
GFX 360/GFX 360
3
CONDTROL.
Safety instructions can be found in the end of this user manual and
should be carefully read before you use the device for the first time.
1. SAFETY REGULATIONS
The user manual should be read carefully before you use the device
for the first time. Unintended use of the device can be dangerous for
human’s health and cause serious injury. Keep this user manual. If the
device is given to somebody for temporary use, be sure to enclose
user manual to it.
- Do not misuse the device.
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the device.
- Do not look into the laser beam or its reflection, with unprotected
eye or through an optical instrument. Do not point the laser beam at
people or animals without the need. You can dazzle them.
- To protect your eyes close them or look aside.
-Always install the product in such a way, so that the laser line is below
or above the eye level.
- Do not let unauthorized people enter the zone of product operation.
- Store the product beyond reach of children and unauthorized
people.
- It is prohibited to disassemble or repair the product yourself. Entrust
product repair to qualified personnel and use original spare parts
only.
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 520 nm
EN60825-1:2014
2. PRODUCT DESCRIPTION
Laser levels GFX 200/GFX 300/GFX 360/GFX 3603 CONDTROL are
designed for projecting and controlling of vertical and horizontal
planes and lines.
The laser levels have 2 operating modes:
- Locked compensator, to project inclined planes and lines;
- Automatic leveling, which allows to automatically compensate
irregularities within self-leveling range of ±5°.
Pulse mode allows to increase working range of the laser level by using
the laser receiver or to work when laser is hard to define in bright
lighting conditions.
These laser levels are suitable for use at both indoor and outdoor
building areas.
- Do not use the product in explosive environment, close to flammable
materials.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

Регулировка
3 года назад