![Avaya 3631 Инструкция по эксплуатации онлайн [24/31] 5759](/img/pdf.png)
Avaya 3631 Инструкция по эксплуатации онлайн [24/31] 5759
3631 Wireless Telephone Administrator Guide 24
To ensure privacy of the private key, it is recommended to download the digital device
certificate and private key using the USB cable only
Use the following procedure to download digital certificates to the phone via a USB cable.
1. On the 3631 telephone, access the Advanced Settings menu
• Be sure to select the Admin access mode and specify the Admin password
(default value is 00000000).
2. From the Advanced menu, select the Service sub-menu.
3. From the Service menu, select Backup & Restore over USB
4. From the Backup & Restore … menu, select Download settings file
• The “Starting USB driver …” status message is displayed
5. When prompted, insert (or remove and re-insert) the USB cable into its connector on
the bottom of the phone.
• A confirmation window appears, with instructions on copying files.
6. From the Windows PC, drag and drop the certificate file(s) onto the USB drive folder
associated with the phone.
7. Once the file(s) have been copied to the USB drive, return to the phone and select the
Done softkey.
• The phone displays a “Downloading file…” status message
8. When the phone displays a “Completed” message, press the Back softkey.
The following procedure may be used to view or delete digital certificates installed on the
phone:
1. On the 3631 telephone, press the A key
2. Press the Left navigation key to display the Log in/Log out menu.
3. Scroll down and select the Certificates entry.
• The phone displays the list of installed certificates
4. Scroll to the desired certificate and press Select.
5. Scroll to and select the View or Delete option as appropriate.
QoS
The 3631 telephone supports WMM Basic for QoS. WMM Basic is specified by the
WiFi Alliance, and is a subset of the IEEE 802.11e standard. WMM prioritizes voice
packets for preferential treatment by APs.
WMM may be enabled/disabled for each Access Profile through the phone’s display
interface. You may also configure WMM support through the 46xxsettings.txt file.
If WMM is enabled, you must also set the appropriate QoS settings in your Access Points
and call server.
In the Access Point, make sure that DiffServ (DSCP) values for packets arriving from
the wired network (including those from the call server) are mapped to the desired
802.11e Access Categories.
Содержание
- Administrator guide 1
- Wireless telephone 1
- Notices 2
- Contents 3
- About this guide 5
- Chapter 1 introduction 5
- Intended audience 5
- Related documents 5
- Chapter 2 installation and configuration 6
- Configuration data storage 6
- Existing parameters 7
- Xxsettings txt file 7
- New parameters 8
- Downloading 46xxsettings file via usb cable 11
- Access profiles 12
- Phone user interface 12
- Data stored on sim card 13
- Sim card 13
- Sim card security 13
- Tcp udp port utilization 14
- Figure 1 signaling audio and management diagram figure 1 signaling audio and management diagram 15
- Wireless telephone administrator guide 15 15
- Figure 2 initialization and address resolution diagram figure 2 initialization and address resolution diagram 16
- Wireless telephone administrator guide 16 16
- Communication manager configuration for 3631 17
- Figure 3 applications diagram figure 3 applications diagram 17
- Station screen 17
- The following sections describe the communication manager screens to configure to ensure proper operation of the 3631 phone 17
- To configure avaya communication manager to support a 3631 telephone you must create a station record for the phone through the communication manager add station command you must enter 4620 as the station type the 3631 telephone may be configured as either a primary extension for the user or as bridged extension off of the user s desktop phone 17
- Wireless telephone administrator guide 17 17
- Ip address mapping screen 18
- Ip codec set screen 18
- Ip network region screen 18
- Initial configuration getting to dial tone 19
- Minimal configuration data 19
- Chapter 3 startup 20
- Startup flow 20
- Chapter 4 software upgrade 21
- Preparing for upgrade 21
- Upgrade configuration file 21
- Following is a sample upgrade configuration file 22
- Wireless telephone administrator guide 22 22
- Chapter 5 security and qos 23
- Installing digital certificates 23
- Security 23
- Backup over usb cable 26
- Chapter 6 backup and restore 26
- Restore via usb cable 27
- Audio parameters display 28
- Chapter 7 diagnostic tools 28
- Site survey 28
- Syslog 28
- Copy syslog data to pc via usb cable 29
- Bad file server address 30
- Chapter 8 troubleshooting 30
- Dhcp error 30
- Phone displays extension in use message 30
- Phone displays nearby networks screen 30
- Phone stuck on logon proceeding message 30
- Upgrade was not successful 30
- No audio 31
- Phone displays extension error message 31
Похожие устройства
- Hyundai H-MW1221 Инструкция по эксплуатации
- Digma FT-210 Инструкция по эксплуатации
- Зубр ЗП-900ЭК Инструкция по эксплуатации
- Alpine CDE-171R Инструкция по эксплуатации
- Involight DJMOON250 Инструкция по эксплуатации
- Prology iMap-500M Инструкция по эксплуатации
- Bork ACPC 3004 FP Инструкция по эксплуатации
- Hyundai H-MW1220 Инструкция по эксплуатации
- Avaya 3641 Инструкция по эксплуатации
- Prology iMap-511A Инструкция по эксплуатации
- Digma FT-205 Инструкция по эксплуатации
- Involight FM1200 Инструкция по эксплуатации
- Bork AS ACGD 3005 FP Инструкция по эксплуатации
- Avaya 3645 Инструкция по эксплуатации
- Hyundai H-MW1217 Инструкция по эксплуатации
- Prology iMap-600M Инструкция по эксплуатации
- Alpine CDE-170R Инструкция по эксплуатации
- Калибр Мастер ЭП-900/30М Инструкция по эксплуатации
- Bork AS ACAR 3002 FP Инструкция по эксплуатации
- Involight FM1500 Инструкция по эксплуатации