Mirka CEROS 550CV [88/108] Additional safety warnings

Mirka CEROS 550CV [88/108] Additional safety warnings
88 MirkCEROS • 150 mm (6") • 125 mm (5") • 77 mm (3")
en | us • ca
Declaration of conformity
KWH Mirka Ltd, 66850 Jeppo, Finland
declare on our sole responsibility that the products Mirka® CEROS 150 mm (6 in.), 125 mm (5 in.) and 77 mm (3 in.)
10,000 rpm Electrical Random Orbital Sander – (see Technical data” table for particular model) to which this
declaration relates are in conformity with the following standard(s) or other normative document(s): EN 60745,
EN 55014, EN 61000 in accordance with the regulations 2006/42/EC, 2014/30/EU, 2011/65/EU.
Jeppo 19.05.2014
Place and date of issue Company Stefan Sjöberg, CEO
Operating instructions, contents:
Declaration of conformity, Important,
Required personal safety equipment,
Additional safety warnings, Proper use of
tool, Exploded view, Parts list, U.S. warranty,
Work stations, How to get started, Technical
data, Noise and vibration information,
Troubleshooting guide, Disposal information
Manufacturer / Supplier
KWH Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.us
Input voltage
110 VAC
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe, accessible location.
We reserve the right to make changes to this manual without prior notice.
Read
operator’s manual
Wear
safety glasses
Wear
ear protection
Wear
safety gloves
Wear
face mask
Required personal safety equipment
Additional safety warnings
a) Always ensure that the material to be sanded is firmly fixed to prevent its movement.
b) Dust can be highly combustible. The vacuum dust collection bag should be cleaned or replaced daily.
Cleaning or replacing of the bag also assures optimum performance.
c) Keep hands clear of the spinning pad during use.
d) Do not allow the tool to free speed without taking precautions to protect any persons or objects from
the loss of the abrasive or pad.
Proper use of tool
This sander is designed for sanding all types of materials i.e. metals, wood, stone, plastics, etc. using abrasive designed
for this purpose. Do not use this sander for any other purpose than that specified without consulting the manufacturer
or the manufacturer’s authorized supplier. Do not press on the shroud when sanding. Pressing on the shroud will
reduce its lifespan. Do not use backing pads that have a working speed less than 10,000 rpm free speed. The cooling
air vents on the housing must always be kept clean and free of blockages to ensure air circulation. Any maintenance
or repair work requiring the motor housing to be opened may only be carried out by an authorized service center. For
optimum results, use sander in conjunction with a dust collection system.

Содержание

Похожие устройства

Скачать