![Grillo PX31 [10/59] Maintenance and lubrication](/img/pdf.png)
Grillo PX31 [10/59] Maintenance and lubrication
![Grillo PX31 [10/59] Maintenance and lubrication](/views2/1650687/page10/bga.png)
PX31-32/ Translation of the original instructions
STARTING WORK
- Adjust the height and lateral position of the handlebar to get the best working position using the
knob (fig. 1 no.4)
- Adjust the working depth by lowering or raising the rear spur (fig. 1 no.5)
- Pull the transfer wheel support to the side and set it into a higher position (fig.6 ref.A)
- Accelerate the engine (fig.2 no.1)
- Press the forward lever (fig.2 no.1). The machine starts working.
- In the PX32 model pull the reverse lever (fig. 1A no.9) to engage the reverse gear. The engine
must be at minimum speed.
Safety device (fig.2 no.1): if it is released even accidentally, the machine stops.
FINISHING WORK
- To stop the machine release the forward lever (fig.2 no.1)
- Switch off the engine by setting the throttle lever to the ZERO position
- Close the petrol tap (where provided).
MAINTENANCE AND LUBRICATION
CAUTION!
- Disconnect the plug before performing any cleaning, maintenance or repair operation.
Always wear suitable clothing and working gloves.
- When the machine or part of it is lifted to carry out maintenance operations, always
remember to use suitable fixing tools such as holders and safety locks.
- When carrying out maintenance operations and/or when the machine is tilted without
safety locks or supports, never leave it unguarded in places where inexperienced people
and children could have easy access to it.
- Protect the environment: carefully dispose of used oils, petrol and any other pollutant
product!
- Effective maintenance and correct lubrication help to keep the machine fully efficient.
The motor hoe has been developed to require very little servicing. Nonetheless to keep the
machine at its top performances please carry out the following operations:
- Carefully follow the instructions given in the engine manual. It is necessary to check the oil level
every 4 working hours and change it about every 50 hours. Refer to the engine manual for the kind
of oil which is needed.
- Adjust the belt tension using the register placed on the lever (fig.1 no.8).
- Often clean the air filter.
- Oil the throttle and tiller engagement cables.
GEARBOX UNIT OIL
Check the level every 50 working hours (fig.3 ref. A). The oil level must exceed the oil level cap.
Use BLASIA 220 S synthetic gearbox oil quantity 1.5 lbs for PX31 and 1.7 lbs for PX32. Fill the oil
through the cap (fig.4 ref. B).
USEFUL HINTS FOR PROPER USE
1) Never leave the machine out in the rain.
2) Do not strain the gear selector if the gears do not engage at once but work the clutch slightly
while engaging it.
3) Never strain the engine too much; in case of excessive smoke from the exhaust pipe the engine
is under strain: reduce speed.
4) Never work at full speed.
5) Remove any leaves and grass which accumulate on the mesh around the drive pulley.
END OF SEASON MAINTENANCE
Wash the machine carefully and change the engine and gearbox oil. Sharpen the hoes and grease
them. If they are worn out they have to be replaced.
7
Содержание
- Grillo px31 grillo px32 1
- Caution before starting the engine read this carefully the fol lowing warnings are very important in ensuring safety 7
- Rotavators px31 px32 7
- Warnings 7
- Identification and after sales service 8
- Instructions for use 9
- Putting the machine into service 9
- Technical specifications px31 32 9
- Maintenance and lubrication 10
- Implements 11
- Motozappe px31 32 12
- Identificazione e assistenza 13
- Caratteristiche tecniche 14
- Istruzioni d uso 15
- Messa in opera della macchina 15
- Manutenzione e lubrificazione 16
- Accessori 17
- Tabella riassuntiva manutenzione 17
- Mises en garde 18
- Motobineuses px31 et px32 18
- Identification et assistance 19
- Caracteristiques techniques 20
- Mise en service de la machine 21
- Mode d emploi 21
- Maintenance et lubrication 22
- Accessoires 23
- Tableau recapitulatif de maintenance 23
- Motorhacke px31 und px32 24
- Sicherheitstechnische hinweise 24
- Identifikation und kundendienst 25
- Technische daten 26
- Betriebsanleitung 27
- Inbetriebnahme der maschine 27
- Zubehör 29
- Zusammenfassende tabelle der wartung 29
- Advertencias contra accidentes 30
- Motoazadas px31 y px32 30
- Identificacion y asistencia 31
- Características tecnica 32
- Px31 40 kg px32 41 kg 32
- Instrucciones de uso 33
- Manutención y lubricación 33
- Puesta en marcha de la maquina 33
- Accesorios 35
- Enxadas px31 e px32 36
- Recomendações de precaução de acidentes 36
- Identificação e assistência 37
- Características tecnicas 38
- Manutenção e lubrificação 39
- Tabela recapitulativa de manutenção 40
- Equipamentos 41
- Συγκεντρωτικο πλανο συντηρησησ 47
- Fig a px32 48
Похожие устройства
- Grillo PX32 Инструкция по эксплуатации
- Grillo PRINCESS Инструкция по эксплуатации
- Grillo PRINCESS III Инструкция по эксплуатации
- Grillo PRINCESS V3 PRO Инструкция по эксплуатации
- Grillo Princess 9 2MR PRO Инструкция по эксплуатации
- Grillo Princess 9 2MR Инструкция по эксплуатации
- Grillo G 131 Инструкция по эксплуатации
- Grillo G 110 Инструкция по эксплуатации
- Grillo G 108 Инструкция по эксплуатации
- Grillo G 107d Инструкция по эксплуатации
- Grillo G 85d Инструкция по эксплуатации
- Grillo G 84 Инструкция по эксплуатации
- Grillo G 55 Инструкция по эксплуатации
- Grillo G 52 Инструкция по эксплуатации
- Grillo G 46 Инструкция по эксплуатации
- Grillo G 45 Инструкция по эксплуатации
- Grillo G 131 SA Инструкция по эксплуатации
- Grillo G 85 Инструкция по эксплуатации
- Grillo G 42 Инструкция по эксплуатации
- Grillo 3500 Инструкция по эксплуатации