Vitek VT-2349 [6/36] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2349 [6/36] English

Vitek VT-2349 [6/36] English
6
ENGLISH
«Night» mode on/off button (16)
–
Press the button (16) on the RC to switch the
“night” mode on. When you switch the “night”
mode on, the symbol (24) will appear on the
control panel display (5), other readings on the
display will be flashing for several seconds and
then will go out.
Notes:
–
When you switch the night mode on, the relative
humidity level automatically sets at 65%.
–
When the night mode is switched on, the timer
continues to work and when the set time is
reached, the unit switches off and goes into
standby mode.
–
To switch the “night” mode off, press any button
on the RC twice.
You can also switch the night mode on with the
control panel (5).
To switch the night mode on touch the button
(18) on the control panel (5) and hold at least
5 seconds. To switch the “night” mode off press any
button twice.
CLEANING AND MAINTENANCE
WARNING! Always switch the air humidifier off
and unplug it before cleaning.
Hard water causes appearance of mineral scale
in the process chamber (7) and in the water tank
(3) that leads to improper operation of the unit. To
avoid it:
–
use filtered and settled water. If tap water is
hard, it is recommended to mix tap water with
distilled water in proportion 1:1. If tap water is
too hard, mix it with distilled water in proportion
1:2 or use distilled water only.
–
Using of water with high content of minerals may
lead to white deposits on surfaces near the air
humidifier and it is not a sign of malfunction of
the air humidifier.
–
Change water in the water tank (3) twice a week.
–
Thoroughly wash the process chamber (7), the
float (9) and the water tank (3) with neutral
detergent solution twice a week.
–
To clean the “sprayer”, add 5-10 drops of deter-
gent on it and wait for approximately 10-15 min-
utes. Remove the scale from the sprayer surface
and then wash the process chamber (7) with
neutral detergent solution.
–
Rinse the process chamber (7) and the water
tank (3) several times. Wipe the process cham-
ber (7) and the float (9) with a soft cloth.
–
Clean the humidifier body with a soft, slightly
damp cloth, and then wipe it dry.
–
Remove and clean the aromatic oil container
(4) and the polyester sponge as they become
dirty.
Notes:
–
do not immerse the air humidifier body into
water or other liquids.
–
do not use abrasive substances and solvents to
clean «sprayer» and the polyester sponge.
–
as a cleaning agent for the «sprayer» you can
use a descaling agent for kettles, strictly follow-
ing the instruction for this substance.
STORAGE
–
Pour the water out of the tank and make
sure that the process chamber (7) and the
“sprayer” are dry before taking the unit away
for storage.
–
Do not keep the air humidifier with water inside
the tank (3) and the process chamber (7).
–
Keep the air humidifier in a dry cool place away
from children and disabled persons.
TROUBLESHOOTING
Malfunction Possible causes Troubleshooting
No “mist” The unit is connected improperly Check if the power plug is inserted into the
mains socket.
The unit is off Switch the unit on by pressing the button (13).
Water tank is empty or there isn’t
enough water in the tank.
Fill the water tank with enough water.
Foreign smell
appears
during the
operation
First use Disconnect the unit from the mains.
Remove the water tank (3), open the lid (1) and
pour the water out of the water tank, then leave
the water tank in a dry cool place for 12 hours.
Dirty or stale water Unplug the unit, remove the water tank (3),
open the lid (1), pour the water out of the water
tank and clean the tank (as described in the
chapter “Cleaning and maintenance”), then fill
it with clean water.
IM VT-2349.indd 6 7/30/20 11:59 AM

Содержание

Похожие устройства

Скачать