PEAKTECH PKT-P3690 Инструкция по эксплуатации онлайн [32/57] 527992

* Disconnect test leads or probe from the measuring circuit before

switching modes or functions.

* Do not conduct voltage measurements with the test leads connected to

the mA/A- and COM-terminal of the equipment.

* The 10A-range is protected. To avoid damage or injury, use the meter

only in circuits limited by fuse or circuit breaker to 10A or 2000VA.

* To avoid electric shock, disconnect power to the unit under test and

discharge all capacitors before taking any resistance measurements.

* Do not conduct current measurements with the leads connected to the

V/-terminals of the equipment.

* Check test leads and probes for faulty insulation or bare wires before

connection to the equipment.

* To avoid electric shock, do not operate this product in wet or damp

conditions. Conduct measuring works only in dry clothing and rubber

shoes, i. e. on isolating mats.

* Never touch the tips of the test leads or probe.

* Comply with the warning labels and other info on the equipment.

* The measurement instrument is not to be to operated unattended.

* Always start with the highest measuring range when measuring

unknown values.

* Do not subject the equipment to direct sunlight or extreme

temperatures, humidity or dampness.

* Do not subject the equipment to shocks or strong vibrations.

* Do not operate the equipment near strong magnetic fields (motors,

transformers etc.).

* Keep hot soldering irons or guns away from the equipment.

* Allow the equipment to stabilize at room temperature before taking up

measurement (important for exact measurements).

* Do not input values over the maximum range of each measurement to

avoid damages of the meter.

* Do not turn the rotary function switch during voltage or current

measurement, otherwise the meter could be damaged.

* Use caution when working with voltages above 35V DC or 25V AC.

These Voltages pose shock hazard.

-31-