PEAKTECH PKT-P3690 [31/57] Safety precautions

1. Safety precautions

This product complies with the requirements of the following European

Community Directives: 2014/30/EU (Electromagnetic Compatibility) and

2014/35/EU (Low Voltage) as amended by 2014/32/EU (CE-Marking).

Overvoltage category III 600V; pollution degree 2.

CAT I: For signal level, telecommunication, electronic with small transient

over voltage

CAT II: For local level, appliances, main wall outlets, portable

equipment

CAT III: Supplied from a cable under earth; fixed installed switches,

automatic cut-off or main plugs

CAT IV: Units and installations, which are supplied overhead lines, which

are stand in a risk of persuade of a lightning, i.e. main-switches

on current input, overvoltage-diverter, current use counter.

To ensure safe operation of the equipment and eliminate the danger of

serious injury due to short-circuits (arcing), the following safety precautions

must be observed.

Damages resulting from failure to observe these safety precautions are

exempt from any legal claims whatever.

* Do not use this instrument for high-energy industrial installation

measurement.

* Do not place the equipment on damp or wet surfaces.

* Do not exceed the maximum permissible input ratings of 600V

AC/DC and 10A (danger of serious injury and/or destruction of the

equipment).

* The meter is designed to withstand the stated max voltages. If it is not

possible to exclude without that impulses, transients, disturbance or for

other reasons, these voltages are exceeded a suitable presale (10:1)

must be used.

* Replace a defective fuse only with a fuse of the original rating. Never

short-circuit fuse or fuse holding.

-30-