AXIOMET AX-T2090 Расширенная инструкция онлайн [4/22] 528184

1. International Safety Symbols

Warning: This symbol indicates that the operator must refer to an explanation in the user

manual to avoid personal injury or damage to the meter

Caution! Risk of electric shock

Reference. Please use utmost attention

Comply with EMC

1.1. Safety Information

Read the user manual carefully before attempting to operate or sever the meter.

The respective accident prevention regulations established by the associations for elecrical

system and equipment must be strictly met at all times.

This WARNING symbol indicates a potentially hazardous situation, which if not avoided,

could result In death or serious injury, or result damage to the product.

This symbol advises the user that the terminal(s) so marked must not be connected to

a circuit point at which the voltage with respect to earth ground exceeds (in the case)

300 VAC or VDC,

Prior to any operation , ensuer that connecting leads used and elecrtonic load are in

perfect condition

If the operator’s safety cannot be guaranteed, the instrument must be removed from

service and protected against use

The Cable Locator may only be used on systems complying with the nominal voltages

indicated in the technical data section

Prior to usage ensure perfect instrument function: we recommend to exclusively connect

the transmiter from the phase towards the neutral conductor.

If the RCD trips when connecting the sender, a fault current is already active within the

installation

If the instrument is subjected to an extremely high elektro-magnetic field, its functioning

ability may be impaired

The safety can no longer be insured if the instrument:

• Shows obvious damage

• Does not carry out the desire measurements

• Has been stored for too long under unfavorable conditions

• Has been subjected to mechanical stress during transport

All relevant statutory regulations must be adhered to when using this instrument.