Gigabyte B450 AORUS Elite V2 (rev. 1.0) [26/44] Cpu vcore cpu vddp dram channel a b voltage 3 v 5v 12v vcore soc

& Memory Frequency (MHz)

 Therstmemoryfrequencyvalueisthenormaloperatingfrequencyofthememorybeingused;thesecond

is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.

 Advanced Memory Settings

ExtremeMemoryProle(X.M.P.)

(Note

)

, System Memory Multiplier, Memory Frequency(MHz)

The settings above are synchronous to those under the same items on the Advanced Frequency Settings

menu.

& Memory Timing Mode

Manualallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),Manual.

& ProleDDRVoltage

 Whenusinganon-XMPmemorymoduleorExtremeMemoryProle(X.M.P.) is set to Disabled, the value

isdisplayedaccordingtoyourmemoryspecication.WhenExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2,thevalueisdisplayedaccordingtotheSPDdataontheXMPmemory.

d Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus

DriveStrength,DataBusConguration

Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensarecongurable

only when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot

after you make changes on the memory timings. If this occurs, please reset the board to default values by

loadingoptimizeddefaultsorclearingtheCMOSvalues.

 Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

 PC Health

& Reset Case Open Status

 Disabled  Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)

 Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show "No" at next boot.

& Case Open

 DisplaysthedetectionstatusofthechassisintrusiondetectiondeviceattachedtothemotherboardCI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC

 Displaysthecurrentsystemvoltages.

 Miscellaneous Settings

& PCIeSlotConguration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation

modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

& 3DMark01 Enhancement

 Allowsyoutodeterminewhethertoenhancesomelegacybenchmarkperformance.(Default:Disabled)

(Note) This item is present only when you install a CPU and a memory module that support this feature.

- 26 -