Gigabyte B360N AORUS GAMING WIFI (rev. 1.0) [25/48] Channel interleaving

& Memory Ref Clock

Allows you to manually adjust the memory reference clock. (Default: Auto)

& Memory Odd Ratio (100/133 or 200/266)

Enabled allows Qclk to run in odd frequency. (Default: Auto)

& Memory Frequency (MHz)

The rst memory frequency value is the normal operating frequency of the memory being used; the second

is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.

` Advanced Memory Settings

& ExtremeMemoryProle(X.M.P.)

, System Memory Multiplier, Memory Ref Clock,

Provides memory detection and training methods.

Auto Lets the BIOS automatically congure this setting. (Default)

Normal The BIOS automatically performs memory training. Please note that if the system

becomes unstable or unbootable, try to clear the CMOS values and reset the board

to default values. (Refer to the introductions of the battery/clear CMOS jumper in

Chapter 1 for how to clear the CMOS values.)

Enable Fast Boot Skip memory detection and training in some specic criteria for faster memory

boot.

Disable Fast Boot Detect and train memory at every single boot.

& Realtime Memory Timing

Interleaving, and memory timing settings below to be congurable. Options are: Auto (default), Manual,

Advanced Manual.

& ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

is displayed according to your memory specication. When ExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2, the value is displayed according to the SPD data on the XMP memory.

& Memory Multiplier Tweaker

Provides different levels of memory auto-tuning. (Default: Auto)

& Channel Interleaving

Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access

(Note) This item is present only when you install a CPU and a memory module that support this feature.

- 25 -