![Gigabyte B360N AORUS GAMING WIFI (rev. 1.0) [7/48] 2 productspecifications](/img/pdf.png)
Gigabyte B360N AORUS GAMING WIFI (rev. 1.0) [7/48] 2 productspecifications
![Gigabyte B360N AORUS GAMING WIFI (rev. 1.0) [7/48] 2 productspecifications](/views2/1666711/page7/bg7.png)
1-2 ProductSpecications
CPU Support for 8th Generation Intel
®
Core
™
i7 processors/Intel
®
Core
™
i5 processors/
Intel
®
Core
™
i3 processors/Intel
®
Pentium
®
processors/Intel
®
Celeron
®
processors
in the LGA1151 package
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU
Chipset
Intel
®
B360 Express Chipset
Memory 2 x DDR4 DIMM sockets supporting up to 32 GB of system memory
Dual channel memory architecture
Support for DDR4 2666/2400/2133 MHz memory modules
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in
non-ECC mode)
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Prole (XMP) memory modules
* To support 2666 MHz or XMP memory, you must install an 8th Generation Intel
®
Core
™
i7/i5 processor.
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
Graphics
Integrated Graphics Processor-Intel
®
HD Graphics support:
- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
* Support for DisplayPort 1.2 version, HDCP 2.2, and HDR.
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
* Support for HDMI 1.4 version and HDCP 2.2.
Maximum shared memory of 1 GB
Audio Realtek
®
ALC892 codec
High Denition Audio
2/4/5.1/7.1-channel
LAN Intel
®
GbE LAN chip (10/100/1000 Mbit)
Wireless
Communication
Module
Intel
®
CNVi interface 802.11a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
BLUETOOTH 5
Support for 11ac wireless standard and up to 433 Mbps data rate
* Actual data rate may vary depending on environment and equipment.
Expansion Slots 1 x PCI Express x16 slot, running at x16
(The PCIEX16 slot conforms to PCI Express 3.0 standard.)
Storage Interface Chipset:
- 1 x M.2 Socket 3 connector on the back of the motherboard (Socket 3, M
key, type 2260/2280 SATA and PCIe x4/x2 SSD support)
- 4 x SATA 6Gb/s connectors
Intel
®
Optane
™
Memory Ready
USB Chipset:
- 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
- 1 x USB Type-C
™
port on the back panel, with USB 3.1 Gen 1 support
- 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through
the internal USB headers)
- 7 -
Содержание
- B360n aorus gaming wifi 1
- Rev 1001 12me b36nagf 1001r 1
- User s manual 1
- B360n aorus gaming wifi 2
- Mar 23 2018 2
- Motherboard 2
- See the latest safety and regulatory documents at gigabyte s website 2
- Wireless module country approvals 2
- Copyright 3
- Disclaimer 3
- Identifying your motherboard revision 3
- B360n aorus gaming wifi motherboard layout 4
- Chapter 1 hardware installation 4
- Chapter 2 bios setup 0 4
- Chapter 3 appendix 9 4
- Table of contents 4
- B360n aorus gaming wifi 5
- B360n aorus gaming wifi motherboard 5 two sata cables 5
- B360n aorus gaming wifi motherboard layout 5
- Box contents 5
- Motherboard driver disk 5 i o shield 5
- Note the chip connector is on the back of the motherboard 5
- User s manual 5 one antenna 5
- 1 installation precautions 6
- Chapter 1 hardware installation 6
- 2 product specifications 7
- 2 productspecifications 7
- 3 installing the cpu 10
- 4 installing the memory 10
- Dualchannelmemoryconfiguration 10
- Installing the cpu 10
- 5 installing an expansion card 11
- 6 back panel connectors 11
- Displayport 11
- Hdmi port 11
- Ps 2 keyboard mouse port 11
- Usb 2 1 port 11
- Usb 3 gen 2 type a port red 11
- Usb type 11
- Center subwoofer speaker out orange 12
- Line in blue 12
- Line out front speaker out green 12
- Mic in pink 12
- Rear speaker out black 12
- Rj 45 lan port 12
- Side speaker out gray 12
- Sma antenna connectors 1t1r 12
- Usb 3 gen 1 port 12
- 7 internal connectors 13
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 14
- 4 cpu_fan sys_fan1 sys_fan2 fan headers 14
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 14
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 14
- Overheating overheating may result in damage to the cpu or the system may hang 14
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 14
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 14
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 14
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 14
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 15
- Connect your digital led strip to the header there are 12v and 5v digital led strips be sure to verify the voltage requirements of your digital led strip and set the dled_v_sw jumper accordingly the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the digital led strip header incorrect connection may lead to the damage of the led strip 15
- Connect your rgb rgbw led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 15
- D_led digital led strip header 15
- For how to turn on off the lights of the led strip refer to the instructions on in chapter 2 bios setup peripherals 15
- Led_c rgb rgbw led strip headers 15
- Pin no definition 15
- The header can be used to connect a standard 5050 digital led strip with maximum power rating of 2a 12v or 5v and maximum length of 5m or maximum number of 300 leds 15
- The header can be used to connect a standard 5050 rgb rgbw led strip 12v g r b w with maximum power rating of 2a 12v and maximum length of 2m 15
- 2 5v default 16
- Dled_v_sw digital led strip power select jumper 16
- Follow the steps below to correctly install an m ssd in the m connector step 1 use a screw driver to unfasten the screw and nut from the motherboard locate the proper mounting hole for the m ssd to be installed and then screw the nut first step 2 slide the m ssd into the connector at an angle step 3 press the m ssd down and then secure it with the screw 16
- M m socket 3 connector 16
- Note the connector is on the back of the motherboard 16
- Pin no definition 16
- Sata3 0 1 2 3 sata 6gb s connectors 16
- Select the proper hole for the m ssd to be installed and refasten the screw and nut 16
- The m connector supports m sata ssds and m pcie ssds 16
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device 16
- This jumper allows you to select the supply voltage of the d_led header be sure to verify the voltage requirements of your digital led strip and set the correct voltage with this jumper before connection incorrect connection may lead to the damage of the led strip 16
- To enable hot plugging for the sata ports refer to chapter 2 bios setup peripherals sata and rst configuration for more information 16
- Ci chassis intrusion header 17
- F_panel front panel header 17
- Speaker speaker header 17
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 18
- F_audio front panel audio header 18
- F_usb usb 2 1 header 18
- F_usb30 usb 3 gen 1 header 18
- From the power outlet to prevent damage to the usb bracket 18
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 18
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 18
- The header conforms to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 18
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 18
- Bat battery battery cable header 19
- Clr_cmos clear cmos jumper 19
- 1 startup screen 20
- Chapter 2 bios setup 20
- 2 the main menu 21
- Classic setup function keys 21
- 3 m i t 22
- C3 state support 23
- C6 c7 state support 23
- Core current limit amps 23
- Cpu enhanced halt c1e 23
- Cpu flex ratio override 23
- Cpu flex ratio settings 23
- Hyper threading technology 23
- Intel r speed shift technology inte 23
- Intel r turbo boost technology 23
- No of cpu cores enabled 23
- Power limit tdp watts power limit time 23
- Speed shift technology 23
- Turbo per core limit control 23
- Turbo rati 23
- Uncore frequency 23
- Uncore ratio 23
- Adjacent cache line prefetch 24
- Allows you to specify the c state limit for the processor auto lets the bios automatically configure this setting default auto 24
- C10 state support 24
- C8 state support 24
- Cpu eist function 24
- Cpu thermal monitor 24
- Energyefficientturb 24
- Extremememoryprofile x m p 24
- Hardware prefetcher 24
- Package c state limit 24
- Race to halt rth 24
- Ring to core offset down bin 24
- System memory multiplier 24
- Voltage optimization 24
- Advanced memory settings 25
- Channel interleaving 25
- Extremememoryprofile x m p 25
- Memory boot mode 25
- Memory enhancement settings 25
- Memory frequency mhz 25
- Memory multiplier tweaker 25
- Memory odd ratio 100 133 or 200 266 25
- Memory odd ratio 100 133 or 200 266 memory frequency mhz 25
- Memory ref clock 25
- Memory timing mode 25
- Profileddrvoltage 25
- Rank interleaving 25
- Realtime memory timing 25
- System memory multiplier memory ref clock 25
- 3dmark01 enhancement 26
- Advanced power settings 26
- Advanced voltage settings 26
- Case open 26
- Channel a b memory sub timings 26
- Chipset voltage control 26
- Cpu core voltage control 26
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 26
- Cpu vcore loadline calibration 26
- Dram voltage control 26
- Internal vr control 26
- Max link speed 26
- Miscellaneous settings 26
- Pc health status 26
- Reset case open status 26
- Fan control mode 27
- Fan control use temperature input 27
- Fan fail warning 27
- Fan speed 27
- Fan speed control 27
- Fan stop 27
- Monitor 27
- Smart fan 5 settings 27
- Temperature 27
- Temperature interval 27
- Temperature warning control 27
- 4 system 28
- Access level 28
- System date 28
- System language 28
- System time 28
- 5 bios 29
- Boot option priorities 29
- Bootup numlock state 29
- Fast boot 29
- Full screen logo show 29
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 29
- Security option 29
- Csm support 30
- Lan pxe boot option rom 30
- Mouse speed 30
- Network stack driver support 30
- Next boot after ac power loss 30
- Ps2 devices support 30
- Sata support 30
- Storage boot option control 30
- Usb support 30
- Vga support 30
- Administrator password 31
- Other pci devices 31
- Secure boot 31
- User password 31
- 6 peripherals 32
- Above 4g decoding 32
- Initial display output 32
- Intel platform trust technology ptt 32
- Leds in sleep hibernation and soft off states 32
- Rgb fusion 32
- Intel r bios guard technology 33
- Ipv4 http support 33
- Ipv4 pxe support 33
- Ipv6 http support 33
- Ipv6 pxe support 33
- Legacy usb support 33
- Mass storage devices 33
- Network stack 33
- Networkstackconfiguration 33
- Offboardsatacontrollerconfiguration 33
- Port 60 64 emulation 33
- Pxe boot wait time 33
- Software guard extensions sgx 33
- Trusted computing 33
- Usb mass storage driver support 33
- Usbconfiguration 33
- Xhci hand off 33
- Aggressive lpm support 34
- Configuredasesata 34
- Hot plug 34
- Intel r ethernet connection 34
- Media detect count 34
- Nvmeconfiguration 34
- Port 0 1 2 3 34
- Sata controller s 34
- Sata mode selection 34
- Sataandrstconfiguration 34
- 7 chipset 35
- Audio controller 35
- Dvmt pre allocated 35
- Dvmt total gfx mem 35
- High precision timer 35
- Internal graphics 35
- Ioapic 24 119 entries 35
- Pch lan controller 35
- Wake on lan enable 35
- 8 power 36
- Ac back 36
- Dmi aspm 36
- Pch aspm 36
- Peg aspm 36
- Platform power management 36
- Power on by keyboard 36
- Cec 2019 ready 37
- Power loading 37
- Power on by mouse 37
- Power on password 37
- Rc6 render standby 37
- Resume by alarm 37
- Soft off by pwr bttn 37
- 9 save exit 38
- Boot override 38
- Exit without saving 38
- Load optimized defaults 38
- Loadprofiles 38
- Save exit setup 38
- Saveprofiles 38
- 1 installing an inte 39
- 1 installing an intel optane memory 39
- A 2 installation in intel rst with intel optane system acceleration mode 39
- Chapter 3 appendix 39
- Installation guidelines a 1 installation in ahci mode 39
- Memory 39
- System requirements 39
- 2 drivers installation 40
- Our commitment to preserving the environment 41
- Regulatory notices 41
- Regulatory statements 41
- Restriction of hazardous substances rohs directive statement 41
- Waste electrical electronic equipment weee directive statement 41
- Weee symbol statement 41
- Caution 42
- Fcc notice u s a only 42
- Canada industry canada ic 43
- European community radio equipment directive red compliance statement 44
- Japan wireless statement 44
- Korea kcc ncc wireless statement 44
- Taiwan ncc wireless statements 無線設備警告聲明 44
- Contact us 48
- Gigabyte esupport 48
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 48
Похожие устройства
- Gigabyte B360M AORUS GAMING 3 (rev. 1.0) Инструкция
- Gigabyte B360 M AORUS PRO (rev. 1.0) Инструкция
- Gigabyte B360 AORUS GAMING 3 WIFI (rev. 1.0) Инструкция
- Gigabyte B360 AORUS GAMING 3 (rev. 1.0) Инструкция
- Gigabyte B365 M AORUS ELITE Инструкция
- Gigabyte H370 AORUS GAMING 3 WIFI (rev. 1.0) Инструкция
- Gigabyte X299X AORUS XTREME WATERFORCE Инструкция
- Gigabyte X299X AORUS MASTER Инструкция
- Gigabyte X299 AORUS Ultra Gaming Pro (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Ultra Gaming (rev. 1.0) Инструкция
- Gigabyte X299 AORUS MASTER Инструкция
- Gigabyte X299 AORUS Gaming 9 (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 7 Pro (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 7 (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 3 Pro (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 3 (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming (rev. 1.0) Инструкция
- Gigabyte C621 AORUS XTREME Инструкция
- Gigabyte X570 AORUS MASTER (rev. 1.0) Инструкция
- Gigabyte X570 AORUS ELITE WIFI (rev. 1.x) Инструкция