![Gigabyte B360 AORUS GAMING 3 WIFI (rev. 1.0) [11/44] 6 back panel connectors](/img/pdf.png)
Gigabyte B360 AORUS GAMING 3 WIFI (rev. 1.0) [11/44] 6 back panel connectors
![Gigabyte B360 AORUS GAMING 3 WIFI (rev. 1.0) [11/44] 6 back panel connectors](/views2/1666714/page11/bgb.png)
Activity LED
Connection/
Speed LED
LAN Port
Activity LED:Connection/Speed LED:
State Description
Orange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
State Description
Blinking Data transmission or receiving is occurring
On No data transmission or receiving is occurring
USB 3.1 Gen 2 Type-A Port (Red)
The USB 3.1 Gen 2 Type-A port supports the USB 3.1 Gen 2 specication and is compatible to the USB
3.1 Gen 1 and USB 2.0 specication. Use this port for USB devices.
USB Type-C
™
Port
The reversible USB port supports the USB 3.1 Gen 1 specication and is compatible to the USB 2.0
specication. Use this port for USB devices.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices. This port shares
bandwidth with the CNVi connector. It becomes unavailable when a Wi-Fi module is populated in the
CNVi connector.
1-6 Back Panel Connectors
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices.
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
DVI-D Port
(Note)
The DVI-D port conforms to the DVI-D specication and supports a maximum resolution of 1920x1200@60 Hz
(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports
DVI-D connection to this port.
USB 3.1 Gen 1 Port
The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specication and is compatible to the USB 2.0
specication. Use this port for USB devices.
HDMI Port
The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master Audio
formats. It also supports up to 192KHz/16bit 8-channel LPCM audio output. You
can use this port to connect your HDMI-supported monitor. The maximum supported resolution is
4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.
(Note) The DVI-D port does not support D-Sub connection by adapter.
- 11 -
Содержание
- B360 aorus gaming 3 wifi b360 aorus gaming 3 1
- For more product details please visit gigabyte s website 1
- Rev 1003 12me b36aga3 1003r 1
- To reduce the impacts on global warming the packaging materials of this product are recyclable and reusable gigabyte works with you to protect the environment 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- B360 aorus gaming 3 wifi b360 aorus gaming 3 motherboard layout 3
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 2 3
- Chapter 3 appendix 1 3
- Table of contents 3
- B360 aorus gaming 3 wifi b360 aorus gaming 3 4
- B360 aorus gaming 3 wifi b360 aorus gaming 3 motherboard layout 4
- B360 aorus gaming 3 wifi or b360 aorus gaming 3 motherboard 4
- Box contents 4
- I o shield 5 cnvi wi fi module installation guide m 4
- M screw s m standoff s 4
- Motherboard driver disk 5 one g connector 4
- Two sata cables 5 one wi fi antenna for the gc ci22m_a m 4
- User s manual 5 gc ci22m_a cnvi wi fi module m 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 9
- Installing the cpu 9
- 4 installing the memory 10
- 5 installing an expansion card 10
- Dualchannelmemoryconfiguration 10
- 6 back panel connectors 11
- Dvi d port 11
- Hdmi port 11
- Ps 2 keyboard mouse port 11
- Rj 45 lan port 11
- Usb 2 1 port 11
- Usb 3 gen 1 port 11
- Usb 3 gen 2 type a port red 11
- Usb type 11
- Center subwoofer speaker out orange 12
- Line in blue 12
- Line out front speaker out green 12
- Mic in pink 12
- Rear speaker out black 12
- Side speaker out gray 12
- 7 internal connectors 13
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 14
- 4 cpu_fan sys_fan1 2 fan headers 14
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 14
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 14
- Overheating overheating may result in damage to the cpu or the system may hang 14
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 14
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 14
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 14
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 14
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 15
- Connect your rgb rgbw led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of the addressable led strip header incorrect connection may lead to the damage of the led strip 15
- Cpu_opt water cooling cpu fan header 15
- For how to turn on off the lights of the led strip refer to the instructions on in chapter 2 bios setup peripherals 15
- Led_c1 led_c2 rgb rgbw led strip headers 15
- Pin no definition 15
- Pwm speed control 15
- Sys_fan3_pump system fan water cooling pump header 15
- The fan header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design 15
- The fan pump header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis the header also provides speed control for a water cooling pump refer to chapter 2 bios setup m i t for more information 15
- The headers can be used to connect a standard 5050 rgb rgbw led strip 12v g r b w with maximum power rating of 2a 12v and maximum length of 2m 15
- Voltage speed control 15
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 16
- Connect your addressable led strip to the header there are 12v and 5v addressable led strips be sure to verify the voltage requirements of your addressable led strip and set the dled_v_sw1 and dled_v_sw2 jumpers accordingly the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the addressable led strip header incorrect connection may lead to the damage of the led strip 16
- D_led1 d_led2 addressable led strip headers 16
- Dled_v_sw1 dled_v_sw2 addressable led strip power select jumpers 16
- For how to turn on off the lights of the led strip refer to the instructions on in chapter 2 bios setup peripherals 16
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 16
- The headers can be used to connect a standard 5050 addressable led strip with maximum power rating of 2a 12v or 5v and maximum length of 5m or maximum number of 300 leds 16
- The jumpers allow you to select the supply voltage of the d_led1 and d_led2 headers be sure to verify the voltage requirements of your addressable led strip and set the correct voltage with this jumper before connection incorrect connection may lead to the damage of the led strip 16
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device 16
- To enable hot plugging for the sata ports refer to chapter 2 bios setup peripherals sata and rst configuration for more information 16
- Due to the limited number of lanes provided by the chipset the availability of the sata connectors may be affected by the type of device installed in the m connector the m2a_32g connector shares bandwidth with the sata3 5 connector the m2p_16g connector shares bandwidth with the sata3 1 connector refer to the following tables for details 17
- Follow the steps below to correctly install an m ssd in the m connector step 1 get a screw and a standoff from the included m screw and standoff packs locate the m connector where you will install the m ssd use a screwdriver to unfasten the screw on the heatsink and then remove the heatsink step 2 locate the proper mounting hole for the m ssd to be installed and then tighten the standoff first insert the m ssd into the m connector at an angle step 3 press the m ssd down and then secure it with the screw replace the heatsink and secure it to the original hole 17
- Installation notices for the m and sata connectors 17
- M2a_32g 17
- M2a_32g m2p_16g m socket 3 connectors 17
- M2p_16g 17
- Select the proper hole for the m ssd to be installed and refasten the screw and nut 17
- The m connectors support m sata ssds or m pcie ssds 17
- Ci chassis intrusion header gray connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 18
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 18
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 18
- F_audio front panel audio header 18
- F_panel front panel header 18
- Gnd 7 gnd 18
- Hd hard drive activity led blue connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 18
- Line2_r 10 sense 18
- Mic2_l 6 sense 18
- Mic2_r 8 no pin 18
- Nc 9 line2_l 18
- Nc orange no connection 18
- Pin no definition pin no definition 18
- Pled pwr_led power led yellow purple 18
- Pw power switch red connects to the power switch on the chassis front panel you may configure the way to turn off your system using the power switch refer to chapter 2 bios setup power for more information 18
- Res reset switch green connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 18
- S3 s4 s5 off 18
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 18
- Speak speaker orange connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 18
- System status led 18
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 18
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 18
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 19
- F_usb usb 2 1 header 19
- F_usb30 usb 3 gen 1 header 19
- From the power outlet to prevent damage to the usb bracket 19
- Spdif_o s pdif out header 19
- The header conforms to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 19
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 19
- This header supports digital s pdif out and connects a s pdif digital audio cable provided by expansion cards for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards for example some graphics cards may require you to use a s pdif digital audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an hdmi display to the graphics card and have digital audio output from the hdmi display at the same time for information about connecting the s pdif digital audio cable carefully read the manual for your expansion card 19
- Add in card 20
- Add in card connector 20
- Com serial port header 20
- Gnd 10 no pin 20
- Lad0 7 lad3 20
- Lad1 9 lframe 20
- Lad2 11 serirq 20
- Lclk 12 lreset 20
- Ndcd 6 ndsr 20
- Ndtr 9 nri 20
- No pin 10 nc 20
- Nsin 7 nrts 20
- Nsout 8 ncts 20
- Pin no definition pin no definition 20
- Supports a thunderbol 20
- Thb_c thunderbol 20
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 20
- This connector is for a gigabyte thunderbol 20
- Tpm trusted platform module header 20
- Vcc3 8 gnd 20
- You may connect a tpm trusted platform module to this header 20
- After system restart go to bios setup to load factory defaults select load optimized defaults or 21
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one damage to your devices may occur if the battery is 21
- Always turn off your computer and unplug the power cord from the power outlet before clearing 21
- Bat battery 21
- Clr_cmos clear cmos jumper 21
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 21
- Cpu cpu status led dram memory status led vga graphics card status led boot operating system status led 21
- Cpu dram vga boot status leds 21
- Manually configure the bios settings refer to chapter 2 bios setup for bios configurations 21
- Object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 21
- Of the battery the positive side should face up 21
- Open normal 21
- Or uncertain about the battery model 21
- Replace the battery 4 plug in the power cord and restart your computer 21
- Replaced with an incorrect model 21
- Short clear cmos values 21
- The battery provides power to keep the values such as bios configurations date and time information in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 21
- The cmos values 21
- The status leds show whether the cpu memory graphics card and operating system are working properly after system power on if the cpu dram vga led is on that means the corresponding device is not working normally if the boot led is on that means you haven t entered the operating system yet 21
- Use this jumper to clear the bios configuration and reset the cmos values to factory defaults to clear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 21
- Used batteries must be handled in accordance with local environmental regulations 21
- When installing the battery note the orientation of the positive side and the negative side 21
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute or use a metal 21
- 1 startup screen 22
- Chapter 2 bios setup 22
- 2 the main menu 23
- Classic setup function keys 23
- 3 m i t 24
- C3 state support 25
- Core current limit amps 25
- Cpu enhanced halt c1e 25
- Cpu flex ratio override 25
- Cpu flex ratio settings 25
- Hyper threading technology 25
- Intel r speed shift technology inte 25
- Intel r turbo boost technology 25
- No of cpu cores enabled 25
- Power limit tdp watts power limit time 25
- Speed shift technology 25
- Turbo per core limit contro 25
- Turbo rati 25
- Uncore frequency 25
- Uncore ratio 25
- Adjacent cache line prefetch 26
- C10 state support 26
- C6 c7 state support 26
- C8 state support 26
- Cpu eist function 26
- Cpu thermal monitor 26
- Energyefficientturb 26
- Hardware prefetcher 26
- Package c state limit 26
- Race to halt rth 26
- Ring to core offset down bin 26
- Voltage optimization 26
- Advanced memory settings 27
- Extremememoryprofile x m p 27
- Memory boot mod 27
- Memory enhancement settings 27
- Memory frequency mhz 27
- Memory odd ratio 100 133 or 200 266 27
- Memory odd ratio 100 133 or 200 266 memory frequency mhz 27
- Memory ref clock 27
- Memory timing mode 27
- Profileddrvoltage 27
- Realtime memory timing 27
- System memory multiplier 27
- System memory multiplier memory ref clock 27
- Advanced power settings 28
- Advanced voltage settings 28
- Case open 28
- Channel a b memory sub timings 28
- Channel interleaving 28
- Chipset voltage control 28
- Cpu core voltage control 28
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 28
- Cpu vcore loadline calibration 28
- Dram voltage control 28
- Internal vr control 28
- Memory multiplier tweaker 28
- Pc health status 28
- Rank interleaving 28
- Reset case open status 28
- 3dmark01 enhancement 29
- Fan control use temperature input 29
- Fan pump control mode 29
- Fan pump fail warning 29
- Fan pump stop 29
- Fan speed 29
- Fan speed control 29
- Flow rate 29
- Max link speed 29
- Miscellaneous settings 29
- Monitor 29
- Smart fan 5 settings 29
- Temperature 29
- Temperature interval 29
- Temperature warning control 29
- 4 system 30
- Access level 30
- System date 30
- System language 30
- System time 30
- 5 bios 31
- Boot option priorities 31
- Bootup numlock state 31
- Fast boot 31
- Full screen logo show 31
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 31
- Security option 31
- Csm support 32
- Lan pxe boot option rom 32
- Mouse speed 32
- Network stack driver support 32
- Next boot after ac power loss 32
- Ps2 devices support 32
- Sata support 32
- Usb support 32
- Vga support 32
- Administrator password 33
- Other pci devices 33
- Storage boot option control 33
- User password 33
- 6 peripherals 34
- Above 4g decoding 34
- Initial display output 34
- Leds in sleep hibernation and soft off states 34
- Rgb fusion 34
- Aggressive lpm support 36
- Configuredasesata 36
- Hot plug 36
- Intel r ethernet connection 36
- Ipv6 http support 36
- Ipv6 pxe support 36
- Media detect count 36
- Nvmeconfiguration 36
- Port 0 1 2 3 4 5 36
- Pxe boot wait time 36
- Sata controller s 36
- Sata mode selection 36
- Sataandrstconfiguration 36
- 7 chipset 37
- Audio controller 37
- Dvmt pre allocated 37
- Dvmt total gfx mem 37
- High precision timer 37
- Internal graphics 37
- Ioapic 24 119 entries 37
- Pch lan controller 37
- Wake on lan enable 37
- 8 power 38
- Ac back 38
- Dmi aspm 38
- Pch aspm 38
- Peg aspm 38
- Platform power management 38
- Power on by keyboard 38
- Cec 2019 ready 39
- Power on by mouse 39
- Power on password 39
- Rc6 render standby 39
- Resume by alarm 39
- Soft off by pwr bttn 39
- 9 save exit 40
- Boot override 40
- Exit without saving 40
- Load optimized defaults 40
- Loadprofiles 40
- Save exit setup 40
- Saveprofiles 40
- 1 installing an inte 41
- 1 installing an intel optane memory 41
- A 2 installation in intel rst with intel optane system acceleration mode 41
- Chapter 3 appendix 41
- Installation guidelines a 1 installation in ahci mode 41
- Memory 41
- System requirements 41
- 2 drivers installation 42
- Battery information 43
- Our commitment to preserving the environment 43
- Regulatory notices 43
- Regulatory statements 43
- Restriction of hazardous substances rohs directive statement 43
- Waste electrical electronic equipment weee directive statement 43
- Weee symbol statement 43
- Canada industry canada ic notices canada avis d industry canada ic 44
- Contact us 44
- Fcc notice u s a only 44
- Gigabyte esupport 44
Похожие устройства
- Gigabyte B360 AORUS GAMING 3 (rev. 1.0) Инструкция
- Gigabyte B365 M AORUS ELITE Инструкция
- Gigabyte H370 AORUS GAMING 3 WIFI (rev. 1.0) Инструкция
- Gigabyte X299X AORUS XTREME WATERFORCE Инструкция
- Gigabyte X299X AORUS MASTER Инструкция
- Gigabyte X299 AORUS Ultra Gaming Pro (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Ultra Gaming (rev. 1.0) Инструкция
- Gigabyte X299 AORUS MASTER Инструкция
- Gigabyte X299 AORUS Gaming 9 (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 7 Pro (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 7 (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 3 Pro (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming 3 (rev. 1.0) Инструкция
- Gigabyte X299 AORUS Gaming (rev. 1.0) Инструкция
- Gigabyte C621 AORUS XTREME Инструкция
- Gigabyte X570 AORUS MASTER (rev. 1.0) Инструкция
- Gigabyte X570 AORUS ELITE WIFI (rev. 1.x) Инструкция
- Gigabyte X570 AORUS ELITE (rev. 1.0) Инструкция
- Gigabyte X399 AORUS XTREME (rev. 1.0) Инструкция
- Gigabyte X399 AORUS PRO (rev. 1.0) Инструкция