Gigabyte B365 M AORUS ELITE [41/48] C 2 uefiraidconfiguration

C-2.UEFIRAIDConguration

Steps:

1. In BIOS Setup, go to BIOS and set CSM Support to Disabled. Save the changes and exit BIOS Setup.

2. After the system reboot, enter BIOS Setup again. Then enter the Peripherals\Intel(R) RapidStorage

Technology sub-menu.

3. On the Intel(R)RapidStorageTechnologymenu,press<Enter>onCreate RAID Volume to enter the

Create RAID Volumescreen.Enteravolumenamewith1~16letters(letterscannotbespecialcharacters)

under the Nameitemandpress<Enter>.Then,selectaRAIDlevel.RAIDlevelssupportedincludeRAID0,

RAID1,RAID10,andRAID5(theselectionsavailabledependonthenumberoftheharddrivesbeing

installed).Next,usethedownarrowkeytomovetoSelect Disks.

4. Under Select Disksitem,selecttheharddrivestobeincludedintheRAIDarray.Pressthe<Space>key

ontheharddrivestobeselected(selectedharddrivesaremarkedwith"X").Thensetthestripeblocksize.

Thestripeblocksizecanbesetfrom4KBto128KB.Onceyouhaveselectedthestripeblocksize,setthe

volume capacity.

5. After setting the capacity, move to Create Volumeandpress<Enter>tobegin.

6. After completing, you'll be brought back to the Intel(R)RapidStorageTechnology screen. Under RAID

VolumesyoucanseethenewRAIDvolume.Toseemoredetailedinformation,press<Enter>onthevolume

tocheckforinformationonRAIDlevel,stripeblocksize,arrayname,andarraycapacity,etc.

PleasevisitGIGABYTE'swebsitefordetailsonconguringaRAIDarray.

C-3.ConguringLegacyRAIDROM

Enter the Intel

legacyRAIDBIOSsetuputilitytocongureaRAIDarray.Skipthisstepandproceedwiththe

installationofWindowsoperatingsystemforanon-RAIDconguration.

Steps:

1. In BIOS Setup, go to BIOS and set CSM Support to Enabled and StorageBootOptionControl to Legacy.

Next, go to Peripherals\SATAAndRSTConguration and make sure UseRSTLegacyOROM is set

to Enabled. Save the changes and exit BIOS Setup. After the POST memory test begins and before the

operatingsystembootbegins,lookforamessagewhichsays"Press<Ctrl-I>toenterCongurationUtility".

Press<Ctrl>+<I>toentertheRAIDCongurationUtility.

2. Afteryoupress<Ctrl>+<I>,theMAIN MENUscreenwillappear.IfyouwanttocreateaRAIDarray,select

Create RAID VolumeinMAINMENUandpress<Enter>.

3. After entering the CREATE VOLUME MENUscreen,enteravolumenamewith1~16letters(letterscannot

bespecialcharacters)undertheNameitemandpress<Enter>.Then,selectaRAIDlevel.RAIDlevels

supportedincludeRAID0,RAID1,RAID10,andRAID5(theselectionsavailabledependonthenumberof

theharddrivesbeinginstalled).Press<Enter>toproceed.

4. Under Disksitem,selecttheharddrivestobeincludedintheRAIDarray.Ifonlytwoharddrivesareinstalled,

theywillbeautomaticallyassignedtothearray.Setthestripeblocksizeifnecessary.Thestripeblocksize

canbesetfrom4KBto128KB.Onceyouhaveselectedthestripeblocksize,press<Enter>.

5. Enterthearraycapacityandpress<Enter>.Finallypress<Enter>on theCreate Volume item to begin

creatingtheRAIDarray.Whenpromptedtoconrmwhethertocreatethisvolume,press<Y>toconrmor

<N>tocancel.

6. Whencompleted,youcanseedetailedinformationabouttheRAIDarrayintheDISK/VOLUMEINFORMATION

section,includingtheRAIDlevel,stripeblocksize,arrayname,andarraycapacity,etc.ToexittheRAID

BIOSutility,press<Esc>orselect6.Exit in MAIN MENU.

3. After completing, you'll be brought back to the Intel(R)RapidStorageTechnology screen. Under RAID

VolumesyoucanseethenewRAIDvolume.Toseemoredetailedinformation,press<Enter>onthevolume

tocheckforinformationonRAIDlevel,stripeblocksize,arrayname,andarraycapacity,etc.

- 41 -

Gigabyte B365 M AORUS ELITE [41/48] C 2 uefiraidconfiguration

Содержание

Похожие устройства