Gigabyte X299 AORUS MASTER [21/140] 7 back panel connectors
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Gigabyte X299 AORUS MASTER [21/140] 7 back panel connectors

Gigabyte X299 AORUS MASTER [21/140] 7 back panel connectors
- 21 -
Hardware Installation
1-7 Back Panel Connectors
Power Button
The power button allows users to quickly turn on/off the computer in an open-case environment when they
want to change hardware components or conduct hardware testing.
Clear CMOS Button
UsethisbuttontocleartheCMOSvalues(e.g.BIOSconguration)andresettheCMOSvaluestofactory
defaults when needed.
USB 3.1 Gen 1 Port
TheUSB3.1Gen1portsupportstheUSB3.1Gen1specicationandiscompatibletotheUSB2.0
specication.UsethisportforUSBdevices.
USB 3.1 Gen 1 Port (White)
TheUSB3.1Gen1portsupportstheUSB3.1Gen1specicationand is compatible to the USB 2.0
specication.UsethisportforUSBdevices.BeforeusingQ-FlashPlus,makesuretoinserttheUSB
ashdrive
(Note)
intothisportrst.
USB 3.1 Gen 2 Type-A Port (Red)
TheUSB3.1Gen2Type-AportsupportstheUSB3.1Gen2specicationandiscompatibletotheUSB
3.1Gen1andUSB2.0specication.UsethisportforUSBdevices.
USB Type-C
™
Port
ThereversibleUSBportsupportstheUSB3.1Gen2specicationandiscompatibletotheUSB3.1Gen
1andUSB2.0specication.UsethisportforUSBdevices.
RJ-45 LAN Port (LAN2)
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Activity LED
Connection/
Speed LED
LAN Port
Activity LED:Connection/Speed LED:
State Description
Orange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
State Description
Blinking Data transmission or receiving is occurring
On No data transmission or receiving is occurring
• Always turn off your computer and unplug the power cord from the power outlet before using
the clear CMOS button.
• Do not use the clear CMOS button when the system is on, or the system may shutdown and
data loss or damage may occur.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).
(Note) TheUSBashdriveusedmustbeaUSB2.0ashdrive.
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent
an electrical short inside the cable connector.

Содержание

Похожие устройства

Скачать