Gigabyte B450M DS3H (rev. 1.0) [23/42] Pc health status

& Memory Timing Mode

Manualallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),Manual.

& ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

isdisplayedaccordingtoyourmemoryspecication.WhenExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2, the value is displayed according to the SPD data on the XMP memory.

` Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus

DriveStrength,DataBusConguration

Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensarecongurableonly

when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot after

you make changes on the memory timings. If this occurs, please reset the board to default values by loading

optimizeddefaultsorclearingtheCMOSvalues.

` Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

` PC Health Status

& Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show"No"atnextboot.

& Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC

Displays the current system voltages.

` Miscellaneous Settings

& PCIeSlotConguration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation

modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongurethis

setting. (Default: Auto)

& 3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

- 23 -