Gigabyte GA-A320M-S2H (rev. 2.0) [23/40] Cpu vcore cpu vddp dram channel a b voltage 3 v 5v 12v vcore soc

& ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

isdisplayedaccordingtoyourmemoryspecication.WhenExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2

,thevalueisdisplayedaccordingtotheSPDdataontheXMPmemory.

& Channel Interleaving

Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access

different channels of the memory to increase memory performance and stability. Auto lets the BIOS

automaticallycongurethissetting.(Default:Auto)

& Rank Interleaving

Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically

congurethissetting.(Default:Auto)

` Channel A/B Memory Sub Timings

This sub-menu provides memory timing settings for each channel of memory. The respective timing setting

screensarecongurableonlywhenMemory Timing Mode is set to Manual or Advanced Manual. Note: Your

system may become unstable or fail to boot after you make changes on the memory timings. If this occurs,

pleaseresettheboardtodefaultvaluesbyloadingoptimizeddefaultsorclearingtheCMOSvalues.

` Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

` PC Health Status

& Reset Case Open Status

Disabled  Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show"No"atnextboot.

& Case Open

 DisplaysthedetectionstatusofthechassisintrusiondetectiondeviceattachedtothemotherboardCI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC

 Displaysthecurrentsystemvoltages.

` Miscellaneous Settings

& PCIeSlotConguration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation

modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

& 3DMark01 Enhancement

 Allowsyoutodeterminewhethertoenhancesomelegacybenchmarkperformance.(Default:Disabled)

- 23 -