Gigabyte GA-A320M-H (rev. 3.0) [23/40] 3dmark01 enhancement

` Advanced Memory Settings

ExtremeMemoryProle(X.M.P.)

(Note

)

, System Memory Multiplier, Memory Frequency(Mhz)

The settings above are synchronous to those under the same items on the Advanced Frequency Settings

menu.

& Memory Timing Mode

Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing

settingsbelowtobecongurable.Optionsare:Auto(default),Manual,AdvancedManual.

& ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

isdisplayedaccordingtoyourmemoryspecication.WhenExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2

,thevalueisdisplayedaccordingtotheSPDdataontheXMPmemory.

` Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus

DriveStrength,DataBusConguration

 Thesesectionsprovidememorytimingsettings.Therespectivetimingsettingscreensarecongurable

only when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot

after you make changes on the memory timings. If this occurs, please reset the board to default values by

loadingoptimizeddefaultsorclearingtheCMOSvalues.

` Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

` PC Health Status

& Reset Case Open Status

Disabled  Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show"No"atnextboot.

& Case Open

 DisplaysthedetectionstatusofthechassisintrusiondetectiondeviceattachedtothemotherboardCI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/VCORE SOC

 Displaysthecurrentsystemvoltages.

` Miscellaneous Settings

& PCIeSlotConguration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation

modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

& 3DMark01 Enhancement

 Allowsyoutodeterminewhethertoenhancesomelegacybenchmarkperformance.(Default:Disabled)

- 23 -