Gigabyte GA-970A-DS3P FX (rev. 2.1) [18/32] Memory frequency mhz

- 18 -

(Note) This item is present only when you install a CPU and a memory module that support this feature.

` Advanced Memory Settings

& ExtremeMemoryProle(X.M.P.)

(Note)

, System Memory Multiplier, Memory Frequency(MHz)

The settings above are synchronous to those under the same items on the Advanced Frequency Settings

menu.

& DRAM Timing Selectable

Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below

to be congurable. Options are: Auto (default), Quick, Expert.

& ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

is displayed according to your memory specication. When ExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2, this item will display the value based on the SPD data on the XMP memory.

& ProleVTTVoltage

The value displayed here is dependent on the CPU being used.

& Channel Interleaving

Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access

different channels of the memory to increase memory performance and stability. Auto lets the BIOS

automatically congure this setting. (Default: Auto)

& Rank Interleaving

Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically

congure this setting. (Default: Auto)

` Channel A/B Timing Settings

This sub-menu provides memory timing settings for each channel of memory. The respective timing setting

screens are congurable only when DRAM Timing Selectable is set to Quick or Expert. Note: Your system

may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please

reset the board to default values by loading optimized defaults or clearing the CMOS values.

` Advanced Voltage Settings

This sub-menu allows you to set CPU and memory voltages.

` PC Health Status

& Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Open eld will

show "No" at next boot.

& System Memory Multiplier

Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD

data. (Default: Auto)

& Memory Frequency (MHz)

The rst memory frequency value is the normal operating frequency of the memory being used; the second

is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.