MEAN WELL RPS-60-48 [2/2] Installation manual
![MEAN WELL CEN-75-54 [2/2] Installation manual](/views2/1669842/page2/bg2.png)
Installation Manual
Manufacturer:
MEAN WELL ENTERPRISES Co., LTD.
No.28, Wuquan 3rd Rd., Wugu Dist.,
New Taipei City 24891, Taiwan
Tel: +886-2-2299-6100
Web: www.meanwell.com
Branch Office:
China
MEAN WELL (GUANGZHOU)
ENTERPRISES Co., LTD.
2F, A Building, Yuean lndustry Park,
Huangcun,Dongpu Yown, Tianhe
District, Gungzhou, China
Post Code:510660
Tel: +86-20-2887-1200
Web: www.meanwell.com.cn
U.S.A.
MEAN WELL USA, INC.
44030 Fremont Blvd., Fremont,
CA 94538, U.S.A.
Tel: +1-510-683-8886
Web: www.meanwellusa.com
Europe
MEAN WELL EUROPE B.V.
Langs de Werf 8, 1185XT
Amstelveen, The Netherlands
Tel: +31-20-758-6000
Web: www.meanwell.eu
Содержание
- All mw s psus are designed in accordance with emc regulations and the related test reports are available by request since they are belong to component power supplies and will be installed inside system enclosure when they are integrated into a system the emc characteristics of the end system must be re verified again 1
- Allow good ventilation for the unit in use to prevent it from overheating also a 10 15 cm clearance 1
- At least 5mm insulation distance on the bottom of the unit should be kept and a mylar film should be added between the unit and the system in addition keep enough insulation distance 10mm for general type 15mm for medical type around the unit 1
- Before commencing any installation or maintenance work please disconnect your system from the utility ensure that it cannot be re connected inadvertently 1
- Installation 1
- Installation manual 1
- Introduction 1
- Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de rating in output current please refer to the specification sheets to receive the optimum mounting position and information about the de rating curve 1
- Must be kept when the adjacent device is a heat source 1
- Note current each wire carries should be de rated to 80 of the current 1
- Open frame pcb type switching power supply 1
- Output current and output wattage must not exceed the rated values on specifications 1
- Please do not install power supplies in places with high ambient temperature or near fire source please refer to the specifications about the maximum ambient temperature limitations 1
- Please do not install power supplies in places with high moisture or near the water 1
- Power supplies greater than 120w may require a forced air fan for cooling please refer to specifications to receive a minimum air intensity and air flow direction 1
- Recommended wires are shown as below 1
- Risk of electrical shock and energy hazard all failure should be examined by a qualified technician please do not try to fix the power supply by yourself 1
- Suggested above when using 5 or more wires connected to the unit 1
- The ground fg must be connected to earth ground 1
- Warning caution 1
- Installation manual 2
Похожие устройства
- MEAN WELL RPS-60-48 Data Sheet
- MEAN WELL RPS-60-48 Каталог
- MEAN WELL RPS-60-5 Data Sheet
- MEAN WELL RPS-60-5 Инструкция язык en
- MEAN WELL RPS-60-5 Инструкция по эксплуатации
- MEAN WELL RPS-60-5 Каталог
- MEAN WELL RPS-65-12 Data Sheet
- MEAN WELL RPS-65-12 Инструкция по эксплуатации
- MEAN WELL RPS-65-12 Инструкция язык en
- MEAN WELL RPS-65-12 Каталог
- MEAN WELL RPS-65-15 Data Sheet
- MEAN WELL RPS-65-15 Инструкция по эксплуатации
- MEAN WELL RPS-65-15 Инструкция язык en
- MEAN WELL RPS-65-15 Каталог
- MEAN WELL RPS-65-24 Инструкция по эксплуатации
- MEAN WELL RPS-65-24 Data Sheet
- MEAN WELL RPS-65-24 Инструкция язык en
- MEAN WELL RPS-65-24 Каталог
- MEAN WELL RPS-65-3.3 Инструкция по эксплуатации
- MEAN WELL RPS-65-3.3 Инструкция язык en