Gazer TV65-US2G [9/114] Initial setting

Gazer TV65-US2G [9/114] Initial setting
7
EN
First start
Initial Setting
The rst time your device is switched on and booted up, it is necessary to fulll the initial setting of the TV set. For this purpose, please check the pictures at the beginning
of this manual and carry out the following:
Attention! Check out the latest software update for your Gazer TV to increase the functionality of your device. You may see system updates called «OTA updates»
in the «Android settings». «Over the air» updates are delivered directly to your TV through Wi-Fi or Ethernet.
Picture 5. Language
Select the interface language. To select necessary item, use the UP/
DOWN buttons on the remote control joystick; in order to conrm, use
the button;
Press the RIGHT button on the remote control joystick in order to proceed
to the next step.
Picture 8. Password
Enter the password using, the virtual keyboard and connect to the available
network, pressing the Connect button�
Picture 6. Time Zone
Select the time zone according to your domestic location. It is needed for
showing the correct information in teletext, TV programmes information
(DVB-T/T2, DVB-S/S2, DVB-C).
Picture 9. Location
Choose the location for a TV use� TV will turn ON and OFF the advertising
for every 30 seconds in case you will choose the «Store». For a home use,
please choose the «Home» parameter
Picture 7. Network
Select the wireless network, which is available in your area. Use the network
with the stable signal. If the Wi-Fi network is not available, please, use the
Ethernet cable�
Picture 10. Welcome
Select the priority mode, when the TV set starts after turning-on;
Press the RIGHT button of the remote control to complete the settings
and proceed to the use of the device�
Attention! Settings items, menu appearance and the home page may differ, depending on the version of the software installed on the TV.

Содержание

Скачать