Gazer CM7010-FB4 [18/60] Airplay and mirrorlink functions

MirrorLink Wi-Fi

For MirrorLink function to work via Wi-Fi, both devices (the multimedia system and the OC Android mobile device) must be

connected to the same Wi-Fi network. There are several ways to do that:

1. By connecting both devices (a mobile device and the multimedia system) to the same Wi-Fi network (home network,

public network, Wi-Fi network of mobile 3G router, etc.).

2. By creating a Wi-Fi network on a mobile device and connecting the multimedia system to it.

3. By creating a Wi-Fi network on the multimedia system and connecting a mobile device to it.

To setup a Wi-Fi network on the multimedia system or an OC Android mobile device, do as follows:

• Open «Settings» – «Router mode»

• Enable the «Wi-Fi hotspot» option

When this function is used for the rst time, one needs to connect the mobile device with a USB cable and enable the «USB

debugging» function on the mobile device. See MirrorLink USB item of this guide for a detailed description of the activation

procedure.

Once both the devices (the multimedia system and the Android mobile device) are connected within a single Wi-Fi network,

one can proceed to enabling MirrorLink function.

To do this, follow the steps below:

• Open PhoneLink app available in the installed apps list

• Select «Android WiFi» option

• Use a USB cable to connect the mobile device to the multimedia system

• Conrm the connection on the mobile device

• Disconnect the USB cable after the successful connection when «Disconnect the USB cable» message appears on the

screen

Note. Use the «Set up Wi-Fi hotspot» item of this menu to change the access password and the name of the newly

created network.

Note. Connection with a USB cable is required only when MirrorLink Wi-Fi function is used for the rst time. After that,

the devices will only need to be connected to the same Wi-Fi network.

AirPlay and MirrorLink Functions