ASRock HYPER QUAD M.2 CARD [2/3] Hyper quad m card utility
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

ASRock HYPER QUAD M.2 CARD [2/3] Hyper quad m card utility

ASRock HYPER QUAD M.2 CARD [2/3] Hyper quad m card utility
ASRock Utility Control Switch
Card Fan Switch
Use this switch to control the card fan speed.
O: Full (e fan runs at full speed)
ON: Half (e fan runs at half speed, with a half voltage supply)
Graphics 12V Power Connector
is card provides a 6-pin graphics 12V power connector. Install the PSU’s
power cable to this connector when more than two M.2 cards* are installed.
*Intel Optane SSD 900P or other M.2 card with higher power consumption
Installing M.2 SSD Module
1. Depending on the PCB type and length of your M.2_SSD (NGFF) module,
nd the corresponding nut location to be used.
2
1
3
4
A
BC D
2. Move the stando based on the module type and length. e stando is
placed at the nut location C by default. Skip Step 3 and 4 and go straight to
Step 5 if you are going to use the default nut. Otherwise, release the stando
by hand.
A
BC D
3. Peel o the yellow protective lm on the nut to be used. Hand tighten the
stando into the desired nut location on the motherboard.
A
BC D
HYPER QUAD M.2 CARD Utility
With the ASRock HYPER QUAD M.2 CARD Utility, you can check that if your
M.2 SSD is properly installed and adjust the fan speed. Place the Support CD
into your DVD-ROM drive to run this utility or download it from the ASRock
website.
M.2 SSD
Status
Select a fan speed mode
[Manual] Select a fan speed preference
[Disable] Turn o the fan
No. 1 2 3 4
Nut Location A B C D
PCB Length 4.2cm 6cm 8cm 11cm
Module Type Type 2242 Type2260 Ty pe 2280 Type 22110
4. Gently insert the M.2 SSD module into the M.2 slot.
Please be aware that the M.2 SSD module only ts in one orientation.
AB
A B
20
o
5. Tighten the screw with a screwdriver to secure the module into place.
Please do not overtighten the screw as this might damage the module.
NUT1NUT2
CD
SW1 Utility control
On Disabled
O Enabled
SW2 SW3 CARD number
O O CARD 1
On O CARD 2
O On CARD 3
On On CARD 4
SW4: no function

Содержание

Похожие устройства

Скачать