Daikin MC707VM-W [23/61] Care and cleaning

Daikin MC707VM-W [23/61] Care and cleaning
Operation Manual ED81-640
22 Photocatalytic Air Purifiers
11
Care and Cleaning
3. Remove the bio-antibody filter.
Remove the bio-antibody filter from hooks (2 locations) at top of
the plasma ionizer.
4. Remove the plasma ionizer.
Holding the handle, lift towards yourself and remove from the top
2 hooks.
5. Remove the opposing pole plates at back of the plasma
ionizer.
Open the knob of the ionizer frame and hold up the opposing pole
plate to remove.
6. Remove the streamer discharger.
Insert your finger into the hole on top (hole with mark) and
then gently pull up the streamer discharger.
Clean the plasma ionizer
(If “cleaning sign” on the main unit display blinks)
CAUTION
Stop operation before cleaning and be careful not to cut your hands
with the opposing pole plate or ionizer wires.
(It is safer to use rubber gloves.)
There are ionizer wires at back of the opposing pole
plate. When attaching or removing, be careful not to cut
them.
“Cleaning sign” blinks if operated while the ionizer wires are cut.
The dust elimination efficiency deteriorates while the sign is
blinking.
If the ionizer wires should be cut, replacement is necessary.
Contact your dealer.
Plasma ionizer
Hooks
(one left and one right)
Knob
Open
Opposing
pole plate
Ionizing frame
Ionized wire
Be careful not
to catch in the
internal ionizer
wires.
It is easier to
remove if lifted
from outside.
Streamer discharger
Blink
Plasma ionizer
3) Streamer discharger
4) Opposing pole plates
1) Ionizing frame
2) Ionized wire
CAUTION
Bio-antibody filter
Top hooks (2 locations)

Содержание

Скачать
Случайные обсуждения

Ответы 0

Здравствуйте!Прошу пояснить назначение части функций дисплея основного блока воздухоочистителя DAIKIN MC707VM-W.У меня следующий вопрос: В инструкции по эксплуатации данного воздухоочистителя указано наличие на дисплее основного блока двух мониторов - Монитор очистки (Пыль) - п. 2 и Монитор очистки (Запах) - п. 3.Согласно содержания инструкции, у каждого из мониторов имеется три режима световых индикаторов.У монитора очистки (Пыль) - слева направо: красный, желтый, зеленый.У монитора очистки (Запах) - слева направо в обратной последовательности: зеленый, желтый, красный.То есть, общее количество световых индикаторов двух указанных мониторов очистки на дисплее основного блока воздухоочистителя должно составлять 6 штук.Но фактически на дисплее основного блока в наличии имеется только 5 световых индикаторов!Каким образом на 5-ти фактически имеющихся на дисплее световых индикаторов распределяются режимы индикации двух различных мониторов очистки (у каждого из которых по 3 режима)?
1 год назад