![Teka TM 620 Инструкция по эксплуатации онлайн [28/39] 64308](/img/pdf.png)
Teka TM 620 Инструкция по эксплуатации онлайн [28/39] 64308
![Teka TM 620 Инструкция по эксплуатации онлайн [28/39] 64308](/views2/1069818/page28/bg1c.png)
Viewing / Changing the programmed
time
To view on the clock indicator (8) the time
left before the hotplate turns off, you only
have to select the hotplate required, both
the decimal point (13) and the control pilot
light (11) which corresponds to the selec-
ted hotplate will turn on.
If you wish to change the time left, follow
the steps below:
1 The hotplate that is to be controlled must
have already been selected. Both the
decimal point (13) and the control pilot
(11) which corresponds to the selected
hotplate must be on.
2 Touch the clock sensor (7). The deci-
mal point (13) for the clock will come on.
3 Use the or sensors (5/4) to alter
the time.
Alternatively you can directly touch the
clock sensor (7) various times until the
control pilot (11) for the hotplate required
comes on. You can then also change the
time, if required, using the sensors or
(5/4).
Disconnecting the clock
When the time that was programmed for
the hotplate elapses, a series of beeps will
sound for at least a minute.
To stop the beeping, touch any sensor.
The hotplate will now be disconnected.
If you wish to stop the clock before the
time programmed has elapsed:
1 The hotplate that is to be controlled must
have already been selected. The deci-
mal point (13) and the pilot light for the
selected hotplate (11) must be on.
2 Touch the clock sensor (7). The deci-
mal point for the clock (13) will come on.
3 Use the sensor (4) to decrease the
time to 00.
Quick switch-off
Repeat steps 1 and 2 above.
3 Touch sensors and (5 and 4) si-
multaneously and the clock will be dis-
connected.
The clock will have been cancelled, but the
hotplate will still be active until you switch
it off.
MODELS TC 620, TR 735 AB AND TR 641
On these models, you can use the clock as
a countdown timer for periods between 1
and 99 minutes, and as a hotplate timer for
times between 1 and 99 minutes. All the
cooking areas can be programmed inde-
pendently and simultaneously.
Timing a hotplate
1 The cooking area to be timed has to be
selected. The corresponding decimal
point (13) must be lit.
2 Select a power level of between 1 and 9
using the or sensors (5-4).
3 Touch the clock sensor (7). The deci-
mal point (13) of the time display (8)
(which shows 00) will come on, and it
will flash on and off along with the con-
trol display (11) of the corresponding
area.
4 Touch the clock sensor (7) again to
increase the value of the time you wish
GB
28
Содержание
- Contents inhalt table des matières spis treœci 2
- Introduction einführung présentation opis urz¹dzenia 4
- Guide to using the instructions booklet 13
- Installation 14
- Positioning the hobs 14
- Fixing the hob see figs 3 and 4 15
- Protective cover 15
- Ceramic hobs with controls 16
- Connecting the electricity 16
- Joining the hob to the oven or the control panel 16
- Positioning the oven 16
- Connecting the gas 17
- Model vt dual 17
- Gas conversion 18
- Table 1 18
- Dimensions and characteristics 19
- Technical information 19
- Configuration 20
- Dimensions of the placement in the unit 20
- Electrics 20
- Hob dimensions 20
- A before installation make sure that the local supply conditions the gas type and pressure are compatible with the applian ce s setup b the setup conditions for this appliance are written on the label or the rating plate c this appliance should not be connected to a device for removing combustion pro ducts it should be installed and connected in compliance with the current installation standards special attention should be paid to the regulations applying to ventilation 21
- A gas cooking appliance produ ces heat and moisture at the site where it is installed the kitchen should be provided with suitable ventilation natu ral ventilation sources should be kept 21
- Characteristics common to all models 21
- Characteristics of the vt dual 21
- Class 3 hob 21
- Clear a window opened or an effective mechical ventilation system device such as a hood installed 21
- Table 2 21
- Table 3 21
- Technical details 21
- The intense and prolonged use of the appliance may call for comple mentary ventilation such as opening a window or more efficient ventilation such as increasing the power of the mechanical ventilation if this exists 21
- The supply voltage and frequency will be as shown on the rating plate 21
- Warnings 21
- You should keep the guaran tee certificate or where relevant the technical datasheet together with the instruction manual for the dura tion of the useful life of the appliance it has important technical information about the appliance 21
- Model vt tc 60 22
- Models tt 630 tt 600 tb 600 tc 620 tr 600 tr 735 ab tr 641 and tm 601 22
- Special requirements before first use 22
- Touch control user instructions 22
- Use and maintenance 22
- Models tr 640 tt 640 tr 620 tt 620 and tm 620 23
- Double and triple circuit hotplates except on tb 600 tt 600 tr 600 and tm 601 24
- Locking the hob s sensors 25
- Heat up function automatic cooking start 26
- Safety disconnection 26
- Table 4 26
- Table 5 26
- Timer function 27
- The clock as a countdown timer 29
- Power surges 30
- Ceramic hobs with controls instructions 31
- Anti accidental turn system on gas controls 32
- Igniting the burners 32
- Model vt dual 32
- Suggestions for using the burners effectively 33
- Advice on using the hotplates effectively 34
- Cleaning and care the burners 34
- Mantaining the vt dual 34
- Cleaning and care 35
- A l appears on the control and it does not work 37
- Before calling the technical service please make the following checks 37
- Fault possible cause possible solution 37
- For all the models 37
- For all the touch control models 37
- If something doesn t work 37
- Message er 03 on the control and the beeping signal control disconnection 37
- Message er 21 on the control and subsequent disconnection 37
- Message er 25 and the beeping signal 37
- Models tt 600 tt 630 tb 600 tr 600 tc 620 tr 735 ab tr 641 and tm 601 37
- Neither the hotplates nor the pilot lights are working 37
- The pan is sticking to the glass 37
- Continuous beeping disconnection of control and symbol on displays 38
- Fault possible cause possible solution 38
- Model vt dual 38
- Models tt 620 tr 620 tr 640 tt 640 vt tc 60 and tm 620 38
- The gas burners are making the pans dirty 38
- The gas burners are not lighting 38
- Cajo 17 39011 santander spain tel 34 942 35 50 50 fax 34 942 34 76 94 http www teka net 39
- Code 61401146 742 39
- Country city company code telephone fax 39
- Sechsheldener str 122 35708 haiger germany tel 49 2771 8141 0 fax 49 2771 8141 10 http www teka net 39
- Teka group 39
- Teka industrial s a 39
- Teka küchentechnik gmbh 39
Похожие устройства
- Garmin nuvi 215 Инструкция по эксплуатации
- Cobra RU 720 Инструкция по эксплуатации
- Intro VR-830 Инструкция по эксплуатации
- Garmin nuvi 205W Инструкция по эксплуатации
- Teka TR 620 Инструкция по эксплуатации
- Cobra RU 730 Инструкция по эксплуатации
- Intro VR-835 Инструкция по эксплуатации
- Garmin Nuvi 205 Инструкция по эксплуатации
- Teka IBR 641 Инструкция по эксплуатации
- Cobra RU 750 Инструкция по эксплуатации
- Intro VR-907 Инструкция по эксплуатации
- Cobra RU 840 Инструкция по эксплуатации
- Teka TR 642 Инструкция по эксплуатации
- Intro VR-908 Инструкция по эксплуатации
- Teka TR 941 HZ Инструкция по эксплуатации
- Cobra RU 860 Инструкция по эксплуатации
- Intro VR-910 Инструкция по эксплуатации
- Teka IR 641 Инструкция по эксплуатации
- Cobra RU 710 Инструкция по эксплуатации
- Intro VR-910L Инструкция по эксплуатации
Скачать
Случайные обсуждения