Griven GRAPH-i-SPOT [8/12] Protection against burns and fire

1.1 Safety information

1.1.1 Protecting against electric shock

• Disconnect the unit from mains supply before servicing it or performing any other action.

• Always ground/earth the unit electrically.

• Before connecting the unit to power supplies, verify that operating voltage and frequency are compatible.

• Do not handle the unit with wet hands or in the presence of water.

• Check regularly that the power supply cable is not damaged or crushed.

• Apply to a qualified technician for any regular maintenance action not described in this manual.

1.1.2 Installation

• Fix the unit with screws, hooks or any other support able to bear the weight of the unit itself.

• If the unit is fixed onto a suspended structure, this structure is supposed to bear at least ten times the weight of

all devices to be fixed.

• The unit installation actions must be performed by a qualified staff.

1.1.3 Protection against burns and fire

• Suitable to be installed onto normally inflammable surfaces.

• The unit is not to be installed in places where the ambient temperature exceeds 60°C (140°F).

1.1.4 Weather protection

The unit is classified as device with an IP67 weather protection rate.

1.2 Compliance

• Product in compliance with EN60598-1 EN60598-2-17.

• Product in compliance with 2002/95/CE (RoHS).

1.0 Introduction

Warning!

This unit is suitable for professional use only, not for domestic use.

8 English