Griven ARCO 650 [8/12] Introduction

1.1 Safety information

1.1.1 Protecting against electric shock

• Disconnect the unit from mains supply before servicing it or performing any other action.

• Always ground/earth the unit electrically.

• Before connecting the unit to power supplies, verify that operating voltage and frequency are compatible.

• Do not handle the unit with wet hands or in the presence of water.

• Check regularly that the power supply cable is not damaged or crushed.

• Apply to a qualified technician for any regular maintenance action not described in this manual.

1.1.2 Installation

• Fix the unit with screws, hooks or any other support able to bear the weight of the unit itself.

• If the unit is fixed onto a suspended structure, this structure is supposed to bear at least ten times the weight of

all devices to be fixed.

• Use a secondary fixing tool, as prescribed by in force rules.

• The unit installation actions must be performed by a qualified staff.

1.1.3 Protection against burns and fire

• Do not install the device on flammable surface. Minimum distance from them should be 0.5 mt.

• The unit is not to be installed in places where the ambient temperature exceeds 50° (122°F).

• If the projector is in a fixed position and the beams is directed towards a flammable surface, the unit should be

kept at a minimum of 0.5 mt.

If the beam is directed to thing at a distance lower than 1 mt, please turn the lamp immediately off.

• The external temperature of the unit surface can reach 180°C (356°F).

• The lamp is very hot during operations! Wait at least for 10 minutes before changing.

1.1.4 Weather protection

The unit is classified as an ordinary device, with an IP20 weather protection rate.

1.2 Compliance

• Product in compliance with EN60598-1 EN60598-2-17.

• Product in compliance with 2002/95/CE (RoHS).

Warning!

This unit is suitable for professional use only, not for domestic use.

1.0 Introduction

8 English