Biostar X570GTA Версия 5.X Руководство пользователя онлайн

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied
Содержание
- Fcc information and copyright 1
- Appendix i specifications in other languages 40 2
- Chapter 1 introduction 3 2
- Chapter 2 hardware installation 7 2
- Chapter 3 uefi bios software 20 2
- Chapter 4 useful help 34 2
- Fcc information and copyright 1 2
- Table of contents 2
- 1 before you start 3
- Chapter 1 introduction 3
- Package checklist 3
- 3 specifications 4
- Chapter 1 introduction 4
- Chapter 1 introduction 5 5
- Rear panel connectors 5
- X570gta 5
- Chapter 1 introduction 6
- Motherboard layout 6
- Chapter 2 hardware installation 7
- Install central processing unit cpu 7
- Install a heatsink 8
- Chapter 2 hardware installation 10
- Connect cooling fans 10
- Cpu_fan1 cpu fan header 10
- Cpu_fan1 sys_fan1support4 pinand3 pinheadconnectors whenconnectingwithwiresonto connectors pleasenotethattheredwireisthepositiveandshouldbeconnectedtopin 2 andthe blackwireisgroundandshouldbeconnectedtopin 1 gnd sys_fan2connectorisonlyavailableforsouthbridgeheatsinkfan 10
- Sys_fan1 system fan header 10
- Sys_fan2 system fan header southbridge heatsink fan header 10
- These fan headers support cooling fans built in the computer the fan cable and connector may be different according to the fan manufacturer 10
- Chapter 2 hardware installation 11 11
- Ddr4 modules 11
- Dual channel memory installation 11
- Install system memory 11
- Memory capacity 11
- O means memory installed x means memory not installed 11
- Please refer to the following requirements to activate dual channel function install memory module of the same density in pairs shown in the table 11
- Step 1 unlock a dimm slot by pressing the retaining clips outward align a dimm on the slot such that the notch on the dimm matches the break on the slot 11
- Step 2 insert the dimm vertically and firmly into the slot until the retaining clips snap back in place and the dimm is properly seated 11
- X570gta 11
- Expansion slots 12
- Install an expansion card 12
- Pcie m2 m key m slot 12
- Pex16_1 pci express gen3 gen4 x16 slot 12
- Pex16_2 pci express gen3 x16 slot x4 lanes 12
- Pex1_1 1_2 pci express gen3 x1 slot 12
- Chapter 2 hardware installation 13 13
- Install m cooling heatsink 13
- Step 1 13
- Step 2 13
- Step 3 13
- X570gta 13
- Jcmos1 clear cmos jumper 14
- Jumper switch setting 14
- Atxpwr1 atx power source connector 15
- Atxpwr2 atx power source connector 15
- Beforeyoupoweronthesystem pleasemakesurethatbothatxpwr1 atxpwr2connectorshave beenplugged in insufficientpowersuppliedtothesystemmayresultininstabilityortheperipheralsnotfunctioning properly useofapsuwithahigherpoweroutputisrecommendedwhenconfiguringasystemwith morepower consumingdevices 15
- Chapter 2 hardware installation 15 15
- For better compatibility we recommend to use a standard atx 24 pin power supply for this connector make sure to find the correct orientation before plugging the connector 15
- Headers connectors 15
- The connector provides 12v to the cpu power circuit if the cpu power plug is 4 pin please plug it into pin 1 2 5 6 of atxpwr2 15
- X570gta 15
- Chapter 2 hardware installation 16
- Jfront_usb3_1 3_2 header for usb 3 gen1 5gb s ports at front panel 16
- Panel1 front panel header 16
- Sata1 2 3 4 5 6 serial ata 6 gb s connectors 16
- These connectors connect to sata hard disk drives via sata cables 16
- This 16 pin header includes power on reset hdd led power led and speaker connection 16
- This header allows user to add additional usb ports on the pc front panel and also can be connected with a wide range of external peripherals 16
- Chapter 2 hardware installation 17 17
- F_audio1 front panel audio header 17
- F_usb1 2 header for usb 2 ports at front panel 17
- Itisrecommendedthatyouconnectahigh definitionfrontpanelaudiomoduletothisconnectorto availofthemotherboard shighdefinitionaudiocapability pleasetrytodisablethe frontpaneljackdetection ifyouwanttouseanac 97frontaudiooutput cable thefunctioncanbefoundviao s audioutility 17
- J_com1 serial port connector 17
- The motherboard has a serial port header for connecting rs 232 port 17
- This header allows user to add additional usb ports on the pc front panel and also can be connected with a wide range of external peripherals 17
- This header allows user to connect the chassis mount front panel audio i o which supports hd and ac 97 audio standards 17
- X570gta 17
- Chapter 2 hardware installation 18
- Ensureproperpinconnectingtoyourleddevice wrongconnectionmaydamageyourleddeviceor motherboard the12v_ledconnectorsupportsto5050rgbledstripswiththemaximumpowerratingof3a 12v the5v_ledconnectorsupportsupto300ledsws2818bindividuallyaddressablergbledstrips withthemaximumpowerratingof3a 5v pleaseusethevividleddjsoftwaretocontroltheleds fordetailedsoftwaresettinginformation refertochapter3 18
- This header providers 12v power and rgb control pins for rgb led device 5050 smd 18
- This header providers 5v power and data control pins for rgb led device ws2818b 18
- V_led addressable rgb led device ws2818b header 18
- V_led rgb led device 5050 smd header 18
- Bios update 20
- Chapter 3 uefi bios software 20
- Uefi bios setup 20
- Installing software 24
- Launching software 24
- Software 24
- Chapter 4 useful help 34
- Driver installation 34
- Ami bios beep code 35
- Ami bios post code 35
- Boot block beep codes 35
- Chapter 4 useful help 35 35
- Post bios beep codes 35
- X570gta 35
- Chapter 4 useful help 36
- After confirmed please follow steps below to relief the cpu protection function 1 remove the power cord from power supply for seconds 2 wait for seconds 3 plug in the power cord and boot up the system 37
- Chapter 4 useful help 37 37
- Cpu overheated if the system shutdown automatically after power on system for seconds that means the cpu protection function has been activated 37
- In this case please double check 1 the cpu cooler surface is placed evenly with the cpu surface 2 cpu fan is rotated normally 3 cpu fan speed is fulfilling with the cpu speed 37
- Or you can 1 clear the cmos data see close cmos header jcmos1 section 2 wait for seconds 3 power on the system again 37
- Troubleshooting 37
- When the cpu is over heated the motherboard will shutdown automatically to avoid a damage of the cpu and the system may not power on again 37
- X570gta 37
- Raid definitions 38
- Raid functions 38
- Appendix i specifications in other languages 40
- Arabic 40
- Appendix i specifications in other languages 41 41
- German 41
- X570gta 41
- Appendix i specifications in other languages 42
- Russian 42
- Спецификации 42
- Appendix i specifications in other languages 43 43
- Spanish 43
- X570gta 43
- Appendix i specifications in other languages 44
- Fcc条款 45
- 免责说明 45
- 防静电操作规则 45
- 目录 46
- 第一章 主板介绍 3 46
- 第三章 uefi bios和软件 19 46
- 第二章 硬件安装 7 46
- 第四章 帮助信息 33 46
- 附录i 产品中有毒有害物质或元素的名称及含量 39 46
- 1 前言 47
- 2 包装清单 47
- 第一章 主板介绍 47
- 3 主板特性 48
- 第一章 主板介绍 48
- 4 后置面板接口 49
- X570gta 49
- 第一章 主板介绍 5 49
- 5 主板布局图 50
- 第一章 主板介绍 50
- 1 中央处理器 cpu 51
- 第二章 硬件安装 51
- 2 散热片 52
- 3 风扇接头 54
- Cpu_fan1 cpu 风扇接头 54
- Cpu_fan1 sys_fan1支持4针脚和3针脚接口 接线时请注意红线是正极需接到第二个针脚 黑线接地需接到gnd针脚 sys_fan2连接器仅适用于南桥散热器风扇 54
- Sys_fan1 系统风扇接头 54
- Sys_fan2 系统风扇接头 南桥散热器风扇接头 54
- 此风扇接头支持电脑内置的冷却风扇 风扇引线和插头可能因制造商而异 54
- 第二章 硬件安装 54
- 4 系统内存 55
- Ddr4内存模组 55
- O 表示内存已安装 x 表示内存未安装 55
- X570gta 55
- 为激活主板双通道功能 使用内存模组必须符合以下要求 成对安装相同密度的内存模 组 如下表所示 55
- 内存容量 55
- 双通道内存安装 55
- 步骤1 向外推开固定夹 打开dimm插槽 将dimm按顺序放在插槽上 dimm上的切 口须与插槽凹口匹配 55
- 步骤2 垂直插入dimm并固定好 直到 固定夹跳回原位 dimm就位 55
- 第二章 硬件安装 11 55
- 5 扩展槽 56
- Pcie m2 m 2 key m 插槽 56
- Pex16_1 pci express gen3 gen4 x16 插槽 56
- Pex16_2 pci express gen3 x16 插槽 56
- Pex1_1 1_2 pci express gen3 x1 插槽 56
- X4 通 56
- 安装扩展卡 56
- 安装m 2 cooling 散热片 57
- 6 跳线设置 58
- Jcmos1 清空cmos 跳线 58
- 7 接口和插槽 59
- Atxpwr1 atx电源接口 59
- Atxpwr2 atx电源接口 59
- X570gta 59
- 为了更好的兼容性 我们建议使用标准的atx24 pin电源供应此接口的电源 59
- 开机前 请确保atxpwr1 atxpwr2接口都已插上电源 电压不足可能导致系统不稳或者外围设备不能正常运行 当配置使用大功率设备的系统时 建议 您使用带有大功率输出的电源 59
- 此接口给cpu电路提供 12v电压 若cpu电源插头为4针脚 请将其插入atxpwr2的 1 2 5 6针脚 59
- 第二章 硬件安装 15 59
- Jfront_usb3_1 3_2 前置面板usb 3 1 gen1 5gb s 接头 60
- Panel1 前置面板接头 60
- Pc前置面板支持附加的usb数据线 也可连接即插即用外围设备 60
- Sata1 2 3 4 5 6 串行ata 6 0 gb s 接口 60
- 此16针脚接口包含开机 重启 硬盘指示灯 电源指示灯和扬声器接口 60
- 此接口通过sata数据线连接sata硬盘 60
- 第二章 硬件安装 60
- F_audio1 前置面板音频接头 61
- F_usb1 2 前置面板usb 2 0接头 61
- J_com1 串行端口 61
- Pc前置面板支持附加的usb数据线 也可连接即插即用外围设备 61
- X570gta 61
- 建议您连接前置高清音频插孔 享用主板高清音频功能 如果要连接ac 97前置音频输出数据线 请关闭 前置面板插孔检测功能 此功能在系统音频 工具中可见 61
- 此主板有一个串行端口可接出rs 232接头 61
- 此接头可连接音频输出数据线 支持hd 高清 音频和ac 97 61
- 第二章 硬件安装 17 61
- 8 led灯 62
- Led灯 62
- Rgb led 裝置接头 5v 12v 62
- V_led addressable rgb led装置 ws2818b 接头 62
- V_led rgb led装置 5050 smd 接头 62
- 下面的led灯由racing gt evo软件控制 请参考3 章节的软件设置 62
- 此接头提供12v电源与rgb控制讯号 可连接rgb led装置 5050 smd 62
- 此接头提供5v电源与数据控制讯号 可连接rgb led装置 ws2818b 62
- 确保正确將针脚连接到led装置 错误的连接可能会损坏您的led装置或主板 12v_led接头支持5050 rgb led灯条 最大输出功率为3a 12v 5v_led接头最多可支持300个led ws2818b addressable rgb led灯条 最大输出功率为 3a 5v 请使用vivid led dj软件控制led 有关详细的软件设置信息 请参阅第3 章 62
- 第二章 硬件安装 62
- 1 uefi bios设置 63
- 2 刷新bios 63
- 第三章 uefi bios和软件 63
- 3 软件 67
- 启动软件 67
- 安装软件 67
- 1 驱动程序安装注意事项 77
- 第四章 帮助信息 77
- 2 ami bios 哔声代码 78
- 3 ami bios 开机自检代码 78
- Bios 开机自检哔声代码 78
- 引导模块哔声代码 78
- 第四章 帮助信息 78
- X570gta 79
- 第四章 帮助信息 35 79
- 4 问题解答 80
- 5 raid 功能 81
- Raid 定义 81
- X570gta 83
- 第四章 帮助信息 39 83
- 附录i 产品中有毒有害物质或元素的名称及含量 83
Похожие устройства
- Biostar B550GTA Версия 5.0 Руководство пользователя
- Biostar B550GTQ Версия 5.0 Руководство пользователя
- Biostar B550M-SILVER Версия 5.x Руководство пользователя
- Biostar Hi-Fi B150S1 Версия 6.x Руководство пользователя
- Biostar Hi-Fi B150Z5 Версия 6.x Руководство пользователя
- Biostar Hi-Fi B150S1 D4 Версия 6.x Руководство пользователя
- Biostar Hi-Fi B150S5 Версия 6.x Руководство пользователя
- Biostar Hi-Fi B150 PIO D4 Версия 6.x Руководство пользователя
- Biostar Hi-Fi H170Z3 Версия 5.x Руководство пользователя
- Biostar Hi-Fi H170S3H Версия 6.x Руководство пользователя
- Biostar Hi-Fi Z170Z5 Версия 6.x Руководство пользователя
- Biostar Hi-Fi B250S1 Версия 6.x Руководство пользователя
- Daikin RX30MYL Руководство по эксплуатации
- Daikin RX30MYL Сервис мануал
- Daikin RX30MYLE Руководство по эксплуатации
- Daikin RX30MYLE Сервис мануал
- Daikin RX32MTL Руководство по эксплуатации
- Daikin RX32MTL Сервис мануал
- Daikin RX32MTLE Руководство по эксплуатации
- Daikin RX32MTLE Сервис мануал