Biostar A68N-5100 Версия 6.x [25/34] Ami bios beep code

A68N-5200/A68N-5100/A68N-5000/A68N-3800/A68N-2100

4.2 AMI BIOS Beep Code

Boot Block Beep Codes

Number of Beeps Description

Continuing Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description

1 Success booting.

8 Display memory error (system video adapter)

4.3 Troubleshooting

Probable Solution

1. There is no power in the system. Power

LED does not shine; the fan of the

power supply does not work

2. Indicator light on keyboard does not

shine.

1. Make sure power cable is securely

plugged in.

2. Replace cable.

3. Contact technical support.

System is inoperative. Keyboard lights are

on, power indicator lights are lit, and hard

drives are running.

Using even pressure on both ends of the

DIMM, press down firmly until the module

snaps into place.

System does not boot from a hard disk drive,

but can be booted from optical drive.

1. Check cable running from disk to disk

controller board. Make sure both ends

are securely plugged in; check the

drive type in the standard CMOS

setup.

2. Backing up the hard drive is

extremely important. All hard disks

are capable of breaking down at any

time.

System only boots from an optical drive.

Hard disks can be read, applications can be

used, but system fails to boot from a hard

disk.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install

applications and data using backup

disks.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure

correct information is in setup.

System cannot boot after user installs a

second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select

correct drive types. Call the drive

manufacturers for compatibility with

other drives.

Biostar A68N-5100 Версия 6.x [25/34] Ami bios beep code

Содержание

Похожие устройства