Cecotec Conga 1590 Active Инструкция по эксплуатации онлайн [28/71] 549077

ENGLISH

• a. Plug one of the adapter ends into the robot’s charging socket and the

other to the power supply. (Fig. a)

• b. While the charging base is connected to the power supply, press on

the remote control for the robot to automatically return to the charging base. (Fig. b).

Note: if the robot’s battery is low during operation, it will automatically return to the charging

base before running out.

3. Battery’s service life

In order to lengthen the battery’s service life:

• Allow the robot to charge for 5 hours during the rst charge.

• Charge the robot as soon as possible when the battery is low.

• If the robot is not going to be used for a long time: fully charge the battery, switch the

robot off and store it in a cool and dry place.

• If the robot has been stored for a long time, allow it to charge for 5 hours before

operating it again.

REMOTE CONTROL

ON/OFF/STANDBY/SLEEP

1. ON/OFF

• Make sure the robot’s power switch is ON.

• During standby mode, press on the robot or on the remote control to start the

robot up.

• During sleeping status, press once to switch the robot to standby mode and then

again to start cleaning.

2. Standby

During this status, the robot is switched on and waiting for user operation.

• During operation, press to stop and switch the robot to standby mode.

3. Sleep

During sleep status, press on the robot or on the remote control to start the robot up.

• During standby mode, press on the robot for 5 seconds to enter sleep mode.

• During standby mode, the robot will enter sleep mode after 10 minutes of no

operation.