Cecotec Conga 1590 Active [27/71] Operation

ENGLISH

5. OPERATION

TOUCH DISPLAY

1. Power button

2. Wi-Fi indicator light

3. Battery indicator light

Note: on the robot and on the remote control has the same function.

1. ON/OFF

• Press to start the robot up.

• From the standby mode:

- Press to start auto cleaning mode.

- Hold down for 3-5 seconds to enter network conguration.

- Hold down for 7 seconds to enter standby mode.

• During operation:

- Press to stop operation.

• During charging:

- Press to enter auto cleaning mode.

2. Wi-Fi indicator light

• When entering network conguration (see before section), the white light will blink

slowly.

• When the device connects to the Wi-Fi, the white light will turn steady.

• If the device fails to connect, the white light will blink faster.

3. Battery indicator light

• The light will turn red when the battery is low.

• The light will switch from blue to red alternately during charging.

• The light will turn steady blue when it is totally charged.

BATTERY CHARGING

1. Charging base

• Place the charging base against the wall.

• Remove any obstacle from around the charging

base, following the safety distances shown on the

below picture:

• Always turn the robot’s power switch ON before

placing it on the charging base.

2. Connection