Home
Главная
Ariston
Варочная Панель
7HKRH 642 DOX
Инструкция по эксплуатации Страница: 6

Ariston 7HKRH 642 DOX [6/16] Care and maintenance

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity

supply before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents (for

example, products in spray cans for cleaning

barbecues and ovens), stain removers, anti-rust

products, powder detergents or sponges with

abrasive surfaces: these may scratch the surface

beyond repair.

! Never use steam cleaners or pressure cleaners on

the appliance.

• It is usually sufficient simply to wash the hob

using a damp sponge and dry it with absorbent

kitchen roll.

• If the hob is particularly dirty, rub it with a special

glass ceramic cleaning product, then rinse well

and dry thoroughly.

• Food residue and dirt can be removed using a

special scraper. Do this as soon as possible, do

not wait for the hob to cool down in order to avoid

incrustations. For excellent results, use a special

stainless steel wool pad for vitroceramic glass

cleaning soaked in soapy water.

• If any plastic or sugary substances are

accidentally melted on the hob, remove them

immediately with the scraper, while the surface is

still hot.

• Once it is clean, the hob may be treated with a

special protective maintenance product: the

invisible film left by this product protects the

surface from drips during cooking. This

maintenance should be carried out while the

appliance is warm (not hot) or cold.

• Always remember to rinse the appliance well with

clean water and dry it thoroughly: residues can

become encrusted during subsequent cooking

processes.

Stainless steel frame *

Stainless steel can be marked by hard water which

has been left on the surface for a long time, or by

cleaning products containing phosphorus.

After cleaning, it is advisable to rinse the surface

well and dry it thoroughly. If water is spilt on the

surface, dry it quickly and thoroughly.

! Some hobs have an aluminium frame which is

similar to stainless steel. Do not use any cleaning or

degreasing products which are not suitable for use

with aluminium.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws fixing the alignment springs on

each side.

2. Loosen the screws holding the fixing hooks in

each corner.

3. Take the hob out of its installation cavity.

! Do not attempt to repair the appliance yourself. If

the appliance breaks down, contact a Service

Centre.

Only available on certain models.

Содержание

Похожие устройства

Care and maintenance Switching the appliance off Stainless steel frame Disconnect your appliance from the electricity supply before carrying out any work on it Stainless steel can be marked by hard water which has been left on the surface for a long time or by cleaning products containing phosphorus After cleaning it is advisable to rinse the surface well and dry it thoroughly If water is spilt on the surface dry it quickly and thoroughly GB Cleaning the appliance Do not use abrasive or corrosive detergents for example products in spray cans for cleaning barbecues and ovens stain removers anti rust products powder detergents or sponges with abrasive surfaces these may scratch the surface beyond repair Never use steam cleaners or pressure cleaners on the appliance It is usually sufficient simply to wash the hob using a damp sponge and dry it with absorbent kitchen roll If the hob is particularly dirty rub it with a special glass ceramic cleaning product then rinse well and dry thoroughly Food residue and dirt can be removed using a special scraper Do this as soon as possible do not wait for the hob to cool down in order to avoid incrustations For excellent results use a special stainless steel wool pad for vitroceramic glass cleaning soaked in soapy water If any plastic or sugary substances are accidentally melted on the hob remove them immediately with the scraper while the surface is still hot Once it is clean the hob may be treated with a special protective maintenance product the invisible film left by this product protects the surface from drips during cooking This maintenance should be carried out while the appliance is warm not hot or cold Always remember to rinse the appliance well with clean water and dry it thoroughly residues can become encrusted during subsequent cooking processes Only available on certain models 6 Some hobs have an aluminium frame which is similar to stainless steel Do not use any cleaning or degreasing products which are not suitable for use with aluminium Disassembling the hob If it is necessary to disassemble the hob 1 Loosen the screws fixing the alignment springs on each side 2 Loosen the screws holding the fixing hooks in each corner 3 Take the hob out of its installation cavity Do not attempt to repair the appliance yourself If the appliance breaks down contact a Service Centre

Скачать