Planet FPS-1011 Инструкция по эксплуатации онлайн [10/20] 66236

10. Please set the network setting for the Print Server Manually. By default, the

network settings are as follow.

IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0

If you have selected “DHCP”, the Print Server will try to determine your network

settings automatically. If a DHCP Server is present within the network, the Print

Server will automatically obtain and congure the network settings assigned by the

DHCP Server. The assigned IP Address will be shown in the IP Address elds. If

no DHCP Server is present within the network, please assign the network settings

of the Print Server manually. Please click “Next” once you have found appropriate

network settings for the Print Server. The conguration are nished. Please click

“Save” to apply new setting and restart the Print Server.

Note

The Print Server IP Address must be set to the same network

segment within your network environment or connected computer.

If the network IP address settings are incorrect, then print server

will not be able to communicate throughout the network. The

message will be prompted to remind you after you click “Next”. If

you do not want to set it now, please click “Cancel” to finish the

installation.

You can then use the “Server Manager” utility to configure the Print

Server IP address.