![Daikin FVXS25FV1B [31/36] Case check](/img/pdf.png)
Daikin FVXS25FV1B [31/36] Case check
![Daikin FVXS35FV1B [31/36] Case check](/views2/1720511/page31/bg1f.png)
30
Please check again before calling a repair person.
Check again.
Case Check
The air conditioner does not
operate.
(OPERATION lamp is off.)
• Hasn’t a breaker turned OFF or a fuse blown?
• Isn’t it a power failure?
• Are batteries set in the remote controller?
• Is the timer setting correct?
Cooling (Heating) effect is poor.
• Are the air filters clean?
• Is there anything to block the air inlet or the outlet of the
indoor and the outdoor units?
• Is the temperature setting appropriate?
• Are the windows and doors closed?
• Are the airflow rate and the air direction set appropriately?
Operation stops suddenly.
(OPERATION lamp flashes.)
• Are the air filters clean?
• Is there anything to block the air inlet or the outlet of the
indoor and the outdoor units?
Clean the air filters or take all obstacles away and turn the
breaker OFF. Then turn it ON again and try operating the air
conditioner with the remote controller. If the lamp still flashes,
call the service shop where you bought the air conditioner.
• Are operation modes all the same for indoor units connected
to outdoor units in the
multi system
?
If not, set all indoor units to the same operation mode and
confirm that the lamps flash.
Moreover, when the operation mode is in “AUTO”, set all
indoor unit operation modes to “COOL” or “HEAT” for a
moment and check again that the lamps are normal.
If the lamps stop flashing after the above steps, there is no
malfunction. (page 24.)
An abnormal functioning
happens during operation.
• The air conditioner may malfunction with lightning or radio
waves. Turn the breaker OFF, turn it ON again and try
operating the air conditioner with the remote controller.
Noise interferes with television
pictures or radio sound while
the air conditioner is in
operation.
• Make sure that no television or radio sets are located close to
the indoor unit.
• Keep the television or radio sets at least 1 m away from the
indoor unit.
Attempted heating, but the unit
would not accept the
instruction.
• When selecting heating, warning beeps are heard, the main
unit operating lamp (green) blinks for 5 seconds, and the
current operating status is maintained.
Check the specifications of the outdoor unit. If the outdoor
unit is cooling only model, set the remote controller for a
cooling only model using the cooling only/heat pump switch
on the remote controller. (page 9.)
If you do not know how to switch the setting, contact the
service shop where you purchased the air conditioner.
The remote controller allows
selection of “heating” even
though the unit is cooling only
model.
Heating cannot be selected,
even though the unit is heat
pump model.
• Set the remote controller so that it is for a heat pump model by using
the cooling only/heat pump switch on the remote controller. (page 9.)
If you do not know how to switch the setting, contact the
service shop where you purchased the air conditioner.
01_EN_3P191290-1K.fm Page 30 Saturday, March 28, 2009 11:41 AM
Содержание
- Daikin room air conditioner 1
- Models fvxs25fv1b fvxs50fv1b fvxs35fv1b 1
- Operation manual 1
- Contents 2
- Operation 2
- Read before operation 2
- Trouble shooting 2
- Caution 3
- Do not place appliances which produce open fire in places exposed to the air flow from the unit or under the indoor unit it may cause incomplete combustion or deformation of the unit due to the heat 3
- Safety precautions 3
- Warning 3
- Consider nuisance to your neighbours from noises 4
- Electrical work 4
- Installation site 4
- System relocation 4
- Caution 5
- Indoor unit 5
- Names of parts 5
- Opening the front panel 5
- 35 class 50 class 6
- Indoor unit 6
- Outdoor unit 6
- Remote controller 7
- Attention 8
- Preparation before operation 8
- To fix the remote controller holder on the wall 8
- To operate the remote controller 8
- To set the batteries 8
- Preparation before operation 9
- To set the clock 9
- Checks on remote controller settings 10
- Please note 10
- This remote controller is common to the heat pump model and cooling only model use the dipswitches on the remote controller to set the heat pump model or cooling only model refer to the following explanation and make the setting as shown in the illustration for customers of heat pump model set to h p for customers of cooling only model set to c o 10
- Tips for saving energy 10
- Turn the breaker on 10
- Turning on the breaker closes the flap this is a normal procedure 10
- Auto dry cool heat fan operation 11
- Press mode selector button and select a operation mode 11
- Press on off button 11
- Press on off button again 11
- Press temperature adjustment button 11
- To change the temperature setting 11
- To start operation 11
- To stop operation 11
- Press fan setting button 12
- To change the airflow rate setting 12
- Adjusting the airflow direction 13
- Notes on flap and louvers angle 13
- To adjust the horizontal blade flap 13
- To adjust the vertical blades louvers 13
- Airflow selection 14
- Caution 14
- When setting the air outlet selection switch to 14
- When setting the airflow selection switch to 14
- Powerful operation 15
- To cancel powerful operation 15
- To start powerful operation 15
- Outdoor unit quiet operation 16
- To cancel outdoor unit quiet operation 16
- To start outdoor unit quiet operation 16
- Econo operation 17
- To cancel econo operation 17
- To start econo operation 17
- Timer operation 18
- To cancel the off timer operation 18
- To use off timer operation 18
- Attention 19
- Timer operation 19
- To cancel on timer operation 19
- To combine on timer and off timer 19
- To use on timer operation 19
- Example 20
- Program 1 program 2 program 3 program 4 20
- Using in these cases of weekly timer 20
- Weekly timer operation 20
- _en_3p191290 1k fm page 19 saturday march 28 2009 11 41 am 20
- To use weekly timer operation 21
- Weekly timer operation 21
- Press button to complete the setting 22
- Press next button 22
- Press select button to select the desired temperature 22
- The day of the week on off timer mode time and set temperature only for on timer mode can be set with weekly timer other settings for on timer are based on the settings just before the operation 22
- Copy mode 23
- Press button 2 23
- Press button to complete the setting 23
- Press copy button 23
- Press copy button to activate copy mode 23
- Weekly timer operation 23
- Confirming a reservation 24
- Normal display confirmation display 24
- Setting displays 24
- To deactivate weekly timer operation 24
- To delete reservations 24
- Night quiet mode available only for cooling operation 25
- Note for multi system 25
- Outdoor unit quiet operation 25
- Selecting the operation mode 25
- Operation mode priority 26
- Priority room setting 26
- Priority when powerful operation is used 26
- Priority when using outdoor unit quiet operation 26
- Attach the front panel 27
- Before cleaning be sure to stop the operation and turn the breaker off 27
- Care and cleaning 27
- Caution 27
- Clean the front panel 27
- Front panel 27
- Indoor unit outdoor unit and remote controller 27
- Open the front panel 27
- Remove the front panel 27
- Wipe them with dry soft cloth 27
- Air filter 28
- Filters 28
- Maintenance 28
- Replacement 28
- Titanium apatite photocatalytic air purifying filter 28
- After operation stops turn off the breaker for the room air conditioner 29
- Before a long idle period 29
- Clean the air filters and set them again 29
- Operate the fan only for several hours on a fine day to dry out the inside 29
- Take out batteries from the remote controller 29
- Case explanation 30
- These cases are not troubles 30
- Trouble shooting 30
- Case check 31
- Check again 31
- Call the service shop immediately 32
- Disposal requirements 32
- Important information regarding the refrigerant used 32
- Warning 32
- We recommend periodical maintenance 32
- A short beep and two consecutive beeps indicate non corresponding codes 33
- Fault diagnosis 33
- Fault diagnosis by remote controller 33
- In the arc452a series the temperature display sections on the main unit indicate corresponding codes 33
- Press the timer cancel button repeatedly until a continuous beep is produced the code indication changes as shown below and notifies with a long beep 33
- To cancel the code display hold the timer cancel button down for 5 seconds the code display also cancel itself if the button is not pressed for 1 minute 33
- When the timer cancel button is held down for 5 seconds a indication flashes on the temperature display section 33
- Turn the power off and then on again if the led display recurs the outdoor unit pcb is faulty 34
- 0904 ht 36
- P191290 1k m06b129f 36
- _cv_3p191290 1k fm page 2 saturday march 21 2009 1 14 pm 36
Похожие устройства
- Daikin FVXS35FV1B Технические данные
- Daikin FVXS35FV1B Инструкция по монтажу
- Daikin FVXS35FV1B Инструкция по эксплуатации
- Daikin FVXS25FV1B Сервис мануал
- Daikin FVXS50FV1B Технические данные
- Daikin FVXS50FV1B Инструкция по эксплуатации
- Daikin FVXS50FV1B Инструкция по монтажу
- Daikin FVXS35FV1B Сервис мануал
- Daikin FVXS50FV1B Сервис мануал
- Kawai ES8B Руководство пользователя
- Kawai ES8W Руководство пользователя
- Kawai ES7B Руководство пользователя
- Kawai ES7W Руководство пользователя
- Kawai ES100B Руководство пользователя
- Kawai ES100W Руководство пользователя
- Kawai CA13C Руководство пользователя
- Kawai CA13B Руководство пользователя
- Kawai CA13R Руководство пользователя
- Kawai CA17B Руководство пользователя
- Kawai CA17R Руководство пользователя