SilverStone ST65ZF [4/12] St65zf manual 04

SilverStone ST65ZF [4/12] St65zf manual 04
03
Load Range 2
Notes:
(1) The maximum continuous total DC outputs power shall not exceed 650W
(2) The maximum continuous load on +5V and +3.3V outputs shall not exceed 170W.
(5) The maximum combined current for the +12V outputs shall be 42A, peak load 45A
(6) The 5V standby output shall remain on while the AC input power connected, whether DC
outputs are disabled (Off) or enabled (On) by the remote on control signal, but when the 5V
Standby output remained on with the AC input power turn off, the remote on control will be
disabled.
(7) The total peak load is 710W for 10 second.
2.3 Output Ripple
2.3.1 Ripple regulation
2.3.2 Definition
The ripple voltage of the outputs shall be measured at the pins of the output connector
when terminated in the load impedance specified in figure 1. Ripple and noise are measured
at the connectors with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to
simulate system loading. Ripple shall be measured under any condition of line voltage,
output load, line frequency, operation temperature.
0.5
2.0
0.5
0.5
0.5
2.0
0.0
0.1
Min.
9
7
5.0
4.0
6.0
5.0
0.5
2.0
Max.Parameter
+3.3V
+5V
+12V1
+12V2
+12V3
+12V4
-12V
+5VSB
Unit
Amps
Amps
Amps
Amps
Amps
Amps
Amps
Amps
Nom.
-
-
-
-
-
-
-
-
Parameter Ripple & Noise Unit
+3.3V
+5V
+12V1
+12V2
+12V3
+12V4
-12V
+5VSB
mVp-p
mVp-p
mVp-p
mVp-p
mVp-p
mVp-p
mVp-p
mVp-p
100
100
150
150
150
150
150
100
Скачать