SilverStone ST65ZF [7/12] St65zf manual 07

ZEUS ST65ZFZEUS ST65ZF

3.5 No load operation

No damage or hazardous condition should occur with all the DC output connectors

disconnected from the load. The power supply may latch into the shutdown state.

4. TIMING

4.1 Signal timing drawing

Figure 2. is a reference for signal timing for main power connector signals and rails

Figure 2. PS-OK Timing Sequence

(1) T2: Rise time (0.1ms~70ms)

(2) T3: Power good signal turn on delay time (100ms~1000ms)

(3) T4: Power good signal turn off delay time (1ms min)

(4) T5: Rise time (10ms max)

(5) T6: Hold up time (17ms min)

4.2 Hold up time

When the power loss its input power, it shall maintain 17ms in regulation limit at normal

input voltage (AC:115V/60Hz or 230V/50Hz)

5. ENVIRONMENT

5.1 Operation

5.2 Shipping and Storage

VAC

PS-ON

+12V/+5V/+3.3V O/P

pw-OK

pw-OK Sense level=95% of

nominal

off

95%

10%

Temperature 0 to 508C

Relative Humidity

10 to 90%, non-condensing

Temperature -20 to 608C

Relative Humidity

5 to 90%, non-condensing