Tcl LED40D2910 Инструкция по эксплуатации онлайн [10/33] 554995

Tcl LED40D2910 Инструкция по эксплуатации онлайн [10/33] 554995
9
Chapter 4 Using More of Your TV
The CAM may enable several digital services,
depending on the operator and services you choose
(for example, pay TV). Contact your digital TV service
operator for more information about services and terms.
Using the Common Interface Function
WARNING: Switch off your TV before inserting a
CAM. Be sure to follow the instructions described
below. Wrong insertion of a CAM may damage both
the module and your TV.
1. Following the directions printed on the CAM, gently
insert the module into the common interface slot on
the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the CAM from the slot. Removing
the module will deactivate the digital services.
Accessing Common Interface Services
After inserting and activating the CAM, press Menu
on the remote control, select Channel > Common
Interface and press OK/ to enter. This menu option
is only available if the CAM is correctly inserted and
activated. On-screen applications and content are
provided by your digital TV service operator.
Note: This feature is only available for digital channels.
Using Subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Turning On/Off Subtitles
1. Press
Menu
on the remote control, select Setup >
Subtitle and press OK/► to enter.
2. Press ◄/► to select On
or Off.
3. Press Exit to close the menu.
Enabling Subtitle Languages on Digital TV Channels
1. Press Menu on the remote control, select Setup >
Subtitle and press OK/► to enter.
2. Press / to select Subtitle Primary Language,
and then press ◄/► to select a language as your
preferred language.
3. Press/ to select Subtitle Secondary Language,
and then press ◄/► to select a secondary subtitle
language.
4. Press Exit to close the menu.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in any of the
cases below:
- you have skipped the channel search step in the
initial setup;
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
Auto Scan
Scanning CH47
Digital Channels Found:
DTV: 0 Radio: 0 Data: 0
Analog Channels Found: 0
MENU:Skip EXIT:Exit
1. In TV mode, press Menu
on the remote control and
select Channel > Tuner Type, then press ◄/► to
select Cable, Antenna or Satellite.
2. Select Auto Scan and then press OK/► to enter.
3. Set Country and Mode (DTV+ATV, DTV or ATV),
press ▲/▼ to highlight Start, and then press
OK/► to start the automatic search process. The
search process may take a few minutes. During the
process, you can press Exit to abort halfway.
Once the scan ends, the TV automatically goes to
the first channel searched, and all the channels are
arranged in a preset order.
Channel Edit
This allows you to skip channels, modify the preset
order, delete, or rename (only in ATV) channels.
1. Press Menu on the remote control, select Channel
> Channel Edit.
2. Press ▲/▼ to highlight a channel, and then press
the colored buttons to perform the corresponding
function indicated at the bottom of the screen.
Automatic Channel Update
This allows you to update all available channels, without
altering the sorting of existing channels.
Note: This feature is only available for digital channels.
1. In DTV mode, press Menu
on the remote control
and select Channel > Auto Channel Update.
2. Press ◄/► to select On to enable automatic
channel update.
Common Interface
(* not available for some models)
Encrypted digital TV channels can be decoded with a
Conditional Access Module (CAM) along with a smart
card provided by a digital TV service operator.

Похожие устройства

Скачать