Grundig 48 CLE 7465 BL [12/35] Setting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig 48 CLE 7465 BL [12/35] Setting

Grundig 48 CLE 7465 BL [12/35] Setting
13
ENGLISH
19 Confirm the password with »

« (green).
– »Connecting ... Please wait« message will be
displayed, and if the connection is established
»Connection To Gateway: Success« messages will be
displayed.
20 Press »

« (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
21 To switch to »Source Setup« menu press »

« (blue).
Note:
7
Continue searching for TV channels with:
– point 22 for DVB-S reception;
– point 27 for DVB-C reception;
– point 32 for DVB-T reception.
Searching television channels with satellite
signal (DVB-S)
22 Select the option »Satellite« with »
<
« or »
>
« and press
»OK« to confirm.
– The satellite Astra 19.2° East is preset.
23 Confirm the push button »Next Page« with »OK«.
Notes:
7
Select the Channel Type.
Press »
<
« or »
>
« to select whether you want to search
for only digital channels (Digital) or only radio channels
(Radio) or both (Digital + Radio) and press »OK« to select
and mark or unmark the »Digital« and/or »Radio« items.
7
Select Scan Mode.
To select whether you want to search for only free
digital television channels (Free), only scrambled
digital television channels (Scrambled) or both (Free +
Scrambled), press »
<
« or »
>
« and press »OK« to select
and mark or unmark the »Free« and/or »Scrambled«
items.
24 Press »
« (red) to start searching.
– »Automatic Channel Search« menu appears and the
scan for TV channels begins.
– The scan is complete as soon as the message »Search
is completed!« appears.
25 Select the »Channel Editor« with »
« (red).
Tuning cable digital television channels
(DVB-C)
26 Select the option »Cable« with »
<
« or »
>
« and press
»OK« to confirm.
27 Select the line »Scan Type« with »
V
« or »
Λ
«.
Select the option »Quick« or »Full« with »
<
« or »
>
«.
– »Quick« scanning function sets the channels according
to the cable operator information in the broadcasting
signal.
– »Full« scan function scans the entire frequency range
selected. With this search option, search can take a
long time. This search type is recommended. Some
cable providers do not support »Quick« scan.
Note:
7
You can speed up the search. To do this, frequency and
network ID information are required. You may get this
data from your cable operator or find it in the Internet
forums.
28 Use »
V
« to select the push button »Next Page« and
confirm with »OK«.
Note:
7
Perform Channel Type selection. Press »
<
« or »
>
« to select
whether you want to search for only digital channels
(Digital), only Analog channels (Analog) or both (Digital
+ Analog) and press »OK« to select and mark or unmark
the »Digital« and »Analog« items.
29 Press »
« (red) to start searching.
– The »Automatic Channel Search« menu appears, and
the search for TV channels begins.
– The scan is complete as soon as the »Search is
completed!« appears.
30 Select the »Channel Editor« with »
« (red).
Tuning terrestrial digital television channels
(DVB-T)
31 Select the option »Air« with »
<
« or »
>
« and press »OK«
to confirm.
Important:
7
The antenna power supply (5V ) may only be switched
on if the antenna is an active indoor antenna with a signal
amplifier and it is not already supplied with a voltage via a
mains plug (or similar supply). Otherwise you may cause
a short circuit and irreparably damage your antenna.
32 Select the line »Active Antenna Power« with »
V
« or
»
Λ
«.
Switch on the antenna power supply for the antenna with
»
<
« or »
>
« (»On«).
33 Select the line »Next Page« with »
V
« or »
Λ
« and press
»OK« to confirm.
Note:
7
Perform Channel Type selection. Press »
<
« or »
>
« to select
whether you want to search for only digital channels
(Digital), only Analog channels (Analog) or both (Digital
+ Analog) and press »OK« to select and mark or unmark
the »Digital« and »Analog« items.
34 Press »
« (red) to start searching.
– The »Automatic Channel Search« menu appears, and
the search for TV channels begins.
– The scan is complete as soon as the »Search is
completed!« appears.
35 Select the »Channel Editor« with »
« (red).
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------

Содержание

Похожие устройства

Скачать