Grundig 48 CLE 7465 BL [20/35] Network setu
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig 48 CLE 7465 BL [20/35] Network setu

Grundig 48 CLE 7465 BL [20/35] Network setu
21
ENGLISH
10 To continue after pressing the WPS button on the access
point, press »

« (green).
– The “Connection to Gateway: Success” message will
be displayed.
11 Press »

« (green) to make sure that the network
connection is established with the current settings.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
12 Press »EXIT« to end the setting.
Wireless WPS network connection with PIN
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with »OK«.
3 Select the menu item »Network Configuration« with »
>
«
or »
<
« and press »OK« to confirm.
– »Network configuration« menu is displayed.
4 Select the line »Change Connection Type« with »
V
« or
»
Λ
« and press »OK« to confirm.
5 Select the option »Wireless WPS« with »
<
« or »
>
« and
press »OK« to confirm.
– WiFi warning screen will be displayed.
6 Activate WiFi with »

« (green).
7 Select the line »WPS Type« with »
V
« or »
Λ
« and select
the option »PIN« with »
<
« or »
>
«.
Network Configuration
Timer Applications TV Settings
Back ExitChange Area
Change Connection Type Wireless WPS
WiFi On
WPS Type
PIN
Select Access Point N/A
Network Configuration AUTO
Advanced
8 Select the line »Select Access Point« with »
V
« or »
Λ
«
and press »OK« to confirm.
– Present WPS-supported wireless networks are scanned
to display in the »Select Access Point« menu.
9 Select the network that you want to connect with »
V
«,
»
Λ
«, »
<
« or »
>
« and press »OK« to confirm.
– 8-digit pin code is displayed in the wireless WPS
menu.
Note:
7
Refer to the manual of your router to find out how the PIN
is entered via a PC.
10 Use a PC to enter the pin on the router (e.g. AVM
FRITZ!Box: menu item WLAN Settings... WPS) and save.
Note:
7
The 8-digit PIN code must be entered in the modem
interface in 2 minutes; otherwise, connection of television
with the modem is cut.
11 Press »

« (green) to confirm the registration.
– The message “Connection to Gateway: Success”
appears.
NETWORK SETUP
-------------------------------------------------------------------------------------------------------------
12 Press »

« (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection
To Gateway: Successfull«, »Internet Connection:
Successfull« messages and MAC address will be
displayed.
13 Press »EXIT« to end the setting.
Connecting automatically by entering the
network password
Use this method for establishing a connection if your router
does not support “WPS-PBC” or WPS PIN entry.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with »OK«.
3 Select the menu item »Network Configuration« with »
>
«
or »
<
« and press »OK« to confirm.
– »Network configuration« menu is displayed.
Network Configuration
Timer Applications TV Settings
Change Connection Type Wired
Network Configuration AUTO
Advanced
OK
Back ExitConnect
Test Connection
Change Area
4 Select the line »Change Connection Type« with »
V
« or
»
Λ
« and press »OK« to confirm.
5 Select the option »Wireless« with »
<
« or »
>
« and press
»OK« to confirm.
– WiFi warning screen will be displayed.
6 Activate WiFi with »

« (green).
7 Select the line »Network Configuration« with »
V
« or
»
Λ
« and select the option »AUTO« with »
<
« or »
>
«.
8 Select the line »Select Access Point« with »
V
« or »
Λ
«
and press »OK« to confirm.
– »Select Access Point« menu is displayed by scanning
available wireless networks.
9 Select the network that you want to connect with »
V
«,
»
Λ
«, »
<
« or »
>
« and press »OK« to confirm.
– Wireless connection password screen is displayed.
Note:
7
For device to discover the wireless modem on the network,
the network name should support ASCII characters.
10 Select the required character with »
V
«, »
Λ
«, »
<
« or
»
>
« and move to the next character with »OK«.
– Using »Shift« ➡ »OK«, you can switch between
uppercase letters / numbers and lowercase letters /
special characters.
– Select »
« to delete the character entered and press
»OK« to confirm.

Содержание

Похожие устройства

Скачать