Korting HI 64540 B [11/32] Auto shutdown

Korting HI 64540 B [11/32] Auto shutdown
11
ИСПОЛЬЗОВАНИЕ ТАЙМЕРА ОБРАТНОГО ОТСЧЕТА (Если вы не выбираете ни одну из рабочих зон)
1. Убедитесь, что варочная поверхность включена, зона приготовления при этом не выбрана (на
индикаторах уровня нагрева не мигает символ «»).
13
Auto Shutdown
Safety feature of the hob is auto shut down. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
7
8
9
Default working timer (hour)
8
8
8
4
4
2
2
2
Using the Timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
You can use it as cut-off timer to turn one or more cooking zones off after time is
up.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone slection key is not activated (zone
indication - is not blinking).
Note: You can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, 00” will show in the timer display
and “0” will blink.
3. Set the time by touching “+” “-” or sliding the control. (e.g.5)
4. Touch timer control again, then 0” will flash.
2. Нажмите на кнопку таймера, на дисплее таймера высветится «00» где второй «0» будет мигать.
13
Auto Shutdown
Safety feature of the hob is auto shut down. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Using the Timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
You can use it as cut-off timer to turn one or more cooking zones off after time is
up.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone slection key is not activated (zone
indication - is not blinking).
Note: You can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, 00” will show in the timer display
and “0” will blink.
3. Set the time by touching “+” “-” or sliding the control. (e.g.5)
4. Touch timer control again, then 0” will flash.
3. Настройте значение таймера кнопками [+] или [-] или слайдером управления, установите нужное
значение, например 5.
13
Auto Shutdown
Safety feature of the hob is auto shut down. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Using the Timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
You can use it as cut-off timer to turn one or more cooking zones off after time is
up.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone slection key is not activated (zone
indication - is not blinking).
Note: You can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, 00” will show in the timer display
and “0” will blink.
3. Set the time by touching “+” “-” or sliding the control. (e.g.5)
4. Touch timer control again, then 0” will flash.
4. Повторно нажмите на кноку таймера, первый «0» начнет мигать.
13
Auto Shutdown
Safety feature of the hob is auto shut down. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Using the Timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
You can use it as cut-off timer to turn one or more cooking zones off after time is
up.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone slection key is not activated (zone
indication - is not blinking).
Note: You can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, 00” will show in the timer display
and “0” will blink.
3. Set the time by touching “+” “-” or sliding the control. (e.g.5)
4. Touch timer control again, then 0” will flash.
5. Настройте значение таймера кнопками [+] или [-] или слайдером управления, установите нужное
значение, например «2». Теперь таймер настроен на «25 минут».
14
5. Set the time by touching “+” “-” or slider control, (e.g.2), now the timer you set is
25 minutes.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
7. Buzzer will bips for 30 seconds and the timer indicator shows
- - when the setting timefinished.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want
to set the timer for.
2. Touch timer control, the “00” will show in the timer
display. And the “0” flashes.
3. Set the time by touching “+” “-” or sliding the control. (e.g.5)
4. Touch timer control again, the 0” will flash.
5. Set the time by touching “+” “-” or slider control (e.g.2), now the timer you set is 25
minutes.
6. Когда время таймера будет установлено начнется его отсчет. На дисплее будет отображаться
оставшееся время.
7. По завершению установленного времени, прозвучит зуковой сигнал в течение 30 сек., на дисплее
отобразится «- -», это будет означать что работа таймера закончена.
14
5. Set the time by touching “+” “-” or slider control, (e.g.2), now the timer you set is
25 minutes.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
7. Buzzer will bips for 30 seconds and the timer indicator shows
- - when the setting timefinished.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want
to set the timer for.
2. Touch timer control, the “00” will show in the timer
display. And the “0” flashes.
3. Set the time by touching “+” “-” or sliding the control. (e.g.5)
4. Touch timer control again, the 0” will flash.
5. Set the time by touching “+” “-” or slider control (e.g.2), now the timer you set is 25
minutes.

Содержание

Скачать
Случайные обсуждения