Home
Главная
Bort
Пылесосы
BSS-2400N
Инструкция по эксплуатации Страница: 8

Bort BSS-2400N [8/32] Assembly instructions

2.Cleaning tools use

1. Crevice tool:

For radiators, crevices, corners, baseboards and

between cushions.

2. Dusting brush(2 in 1 ) is used for the furniture,

venation, blinds, book, lamp shades and shelves,etc.

Separately it can be used as a sofa nozzle.

INSTRUCTIONS FOR USE

Before using appliance, pull out a sufﬁ cient length

of cable and insert the plug into the power socket. A

yellow mark on the power cable shows the ideal cable

length. Don’t expend the cable beyond the red mark.

1. Switch Button

Insert the power plug into the socket. Press the main

ON/OFF Switch button on vacuum body to switch on

the vacuum machine, then the power indicating lamp

(neo-lamp) will be lighting, it is ready for work.

Then you can slide the power button on the hose handle

to switch on and adjust the power of this vacuum.

2. Auto Cord Rewind Button

To rewind the power cord, press the rewind button with

one hand and guide the cable with the other hand to

ensure that it does not whip causing damage.

3. Power Control Button

Turn on the main switch on the vacuum machine, then

the power neon-light will be turn on. Then it is ready

for work. You can slide the power control button on

the handle to switch off or adjust the suction power

of the machine. If you stop the cleaning for a while,

please just slide the power control button on handle

to ‘OFF’, then the vacuum will stop to sucking. When

you ﬁ nish all cleaning work, please again push the

main ‘ON/OFF’ switch on vacuum body, to switch off

the electricity supply to this vacuum. (The neon-light

will be turn off at that time.), and storage your vacuum

properly.

( Attention: The ﬂ exible hose must be ﬁ xed into the

vacuum body, then the vacuum can work. Otherwise,

the vacuum can’t work without the ﬂ exible hose ﬁ xed

in.)

12. Before using the cleaner, please remove big and

sharp matters on the ﬂ oor to avoid damaging the plas-

tic parts, ﬁ lter gauzes and motor.

13. Never absorb water or other liquid with this cleaner,

otherwise, the motor will be damaged.

14. This appliance is not intended for use by persons

(including children), with reduced physical, sensory or

mental capabilities, or lack of experience and knowl-

edge, unless they have been given supervision or in-

struction concerning use of the appliance by a person

responsible for their safety.

ASSEMBLY INSTRUCTIONS

Always remove the plug from the power socket before

ﬁ tting or removing accessories!

1. Equiping vacuum cleaner

1. Fixing the ﬂ exible hose on vacuum machine:

REPLACEMENT OF REAR

FILTER FOR MOTOR

The rear ﬁ lter for motor is installed behind the air outlet

grid, which can be washed due to the materials used.

When the surface is jammed seriously by dust, the ﬁ lter

should be replaced by a new one or washed by water

to maintain enough suction force.

It is usually necessary to clean and replace the ﬁ lters

for motor only after they have been used for 6 months

to 12 months. Please remember to conﬁ rm that all

ﬁ lters have been correctly installed into the machine

before turning on the cleaner to use.

Key Points:

The power supply of the cleaner must be cut off before

replacing any ﬁ lter!

FAULTS AND REPAIR

In case of abnormality with this product, please treat

it in the way as stated hereinafter; if the cleaner still

refuses to work normally, please contact the stop from

where this product was bought or with the appointed

service point.

Insert hose joint into the air intake duct on the front of

appliance. Press until it clicks into position.

( Attention: The ﬂ exible hose must be ﬁ xed into the

vacuum body, then the vacuum can work. Otherwise,

the vacuum can’t work without the ﬂ exible hose ﬁ xed

in.)

** Removing the ﬂ exible hose from vacuum machine:

Removing the plug from the power socket. Press

release button on hose joint to remove the ﬂ exible hose

from the vacuum machine.

2.Fixing the extension tubes and accessories

a. Fixing the telescopic tube to the handle.

b. Fixing the brush to the extension tube.

c. Fixing Floor brush Ideal for the daily cleaning on

carpets and hard ﬂ oors.

Содержание

Похожие устройства

12 Before using the cleaner please remove big and sharp matters on the floor to avoid damaging the plas tic parts filter gauzes and motor 13 Never absorb water or other liquid with this cleaner otherwise the motor will be damaged 14 This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowl edge unless they have been given supervision or in struction concerning use of the appliance by a person responsible for their safety ASSEMBLY INSTRUCTIONS Always remove the plug from fitting or removing accessories the power socket 2 Cleaning tools use 1 Crevice tool For radiators crevices corners baseboards and between cushions 2 Dusting brush 2 in 1 is used for the furniture venation blinds book lamp shades and shelves etc Separately it can be used as a sofa nozzle INSTRUCTIONS FOR USE Before using appliance pull out a sufficient length of cable and insert the plug into the power socket A yellow mark on the power cable shows the ideal cable length Don t expend the cable beyond the red mark before 1 Switch Button Insert the power plug into the socket Press the main ON OFF Switch button on vacuum body to switch on the vacuum machine then the power indicating lamp neo lamp will be lighting it is ready for work Then you can slide the power button on the hose handle 1 Equiping vacuum cleaner 1 Fixing the flexible hose on vacuum machine REPLACEMENT OF REAR FILTER FOR MOTOR The rear filter for motor is installed behind the air outlet grid which can be washed due to the materials used When the surface is jammed seriously by dust the filter should be replaced by a new one or washed by water to maintain enough suction force It is usually necessary to clean and replace the filters for motor only after they have been used for 6 months to 12 months Please remember to confirm that all filters have been correctly installed into the machine before turning on the cleaner to use Key Points The power supply of the cleaner must be cut off before replacing any filter FAULTS AND REPAIR In case of abnormality with this product please treat it in the way as stated hereinafter if the cleaner still refuses to work normally please contact the stop from where this product was bought or with the appointed service point Insert hose joint into the air intake duct on the front of appliance Press until it clicks into position Attention The flexible hose must be fixed into the vacuum body then the vacuum can work Otherwise the vacuum can t work without the flexible hose fixed in Removing the flexible hose from vacuum machine Removing the plug from the power socket Press release button on hose joint to remove the flexible hose from the vacuum machine 2 Fixing the extension tubes and accessories a Fixing the telescopic tube to the handle b Fixing the brush to the extension tube c Fixing Floor brush Ideal for the carpets and hard floors 8 daily cleaning on 2 Auto Cord Rewind Button To rewind the power cord press the rewind button with one hand and guide the cable with the other hand to ensure that it does not whip causing damage 3 Power Control Button Turn on the main switch on the vacuum machine then the power neon light will be turn on Then it is ready for work You can slide the power control button on the handle to switch off or adjust the suction power of the machine If you stop the cleaning for a while please just slide the power control button on handle to OFF then the vacuum will stop to sucking When you finish all cleaning work please again push the main ON OFF switch on vacuum body to switch off the electricity supply to this vacuum The neon light will be turn off at that time and storage your vacuum properly Attention The flexible hose must be fixed into the vacuum body then the vacuum can work Otherwise the vacuum can t work without the flexible hose fixed in

Скачать