Bort BSS-1800-pet [13/28] Faults and repair
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bort BSS-1800-pet [13/28] Faults and repair

Bort BSS-1800-pet [13/28] Faults and repair
13
Cleaning of front fi lter for motor:
Warning: please make sure the power supply of
the cleaner has been cut off before carrying out the
following steps:
1. Pull out the power cord plug of the cleaner from the
power socket.
2. Press down the handle of the dust barrel to remove
the dust barrel, and remove the cover of the front fi lter
for motor, and then use the brush to clean the fi lter
(sponge and fi lter gauze with composite coating) or
place it under the cock to clean, as is shown in Figure
(9/10).
Caution:
It is normal that the white central fi lter in the dust barrel
may change color, which cannot affect its fi ltration
performance. If the hose and the central fi lter are
diffi cult to clean, we recommend that you use water to
fl ush them; however, please be sure to place them in
the dry air for at least 24 hours after they are fl ushed
by water.
Key Points:
Please note: when the dust collecting barrel or the fi lter
cover is not installed in place, the operation status will
be invalid, and the cleaner will have no dust absorption
capacity. At this time, you need to check carefully
whether the dust collecting barrel and the fi lter cover
have been installed in place.
Caution: please keep the suction passage unobstructed,
otherwise the motor may become overheating or even
be damaged.
REPLACEMENT OF REAR FILTER
FOR MOTOR
The rear fi lter for motor is installed behind the air outlet
grid, which can be washed due to the materials used.
When the surface is jammed seriously by dust, the fi lter
should be replaced by a new one or washed by water
to maintain enough suction force. (Figure 11/12)
It is usually necessary to clean and replace the fi lters
for motor only after they have been used for 6 months
to 12 months. Please remember to confi rm that all
fi lters have been correctly installed into the machine
before turning on the cleaner to use.
Key Points:
The power supply of the cleaner must be cut off before
replacing any fi lter!
FAULTS AND REPAIR
In case of abnormality with this product, please treat
it in the way as stated hereinafter; if the cleaner still
refuses to work normally, please contact the stop from
where this product was bought or with the appointed
service point.

Содержание

Похожие устройства

Скачать