Unit UEK-282 Black [7/16] Operation of the device

Tea maker | UEK-282

DEVICE DESCRIPTION

BEFORE FIRST USE

1. Carefully unpack the appliance. Remove from the device all packing

materials.

2. Rinse the glass pot with warm running water. Wait until the glass pot is

completely dry.

3. Fill a large kettle with water to the maximum level and boil it. Then drain

the water and repeat the process again.

OPERATION OF THE DEVICE

Boiling water

1. When ﬁlling the water kettle should always be unplugged.

2. Fill the kettle, controlling the water ﬁll level on a scale level. Avoid ﬁlling

the kettle above the maximum level (1.7 liters). Make sure the lid is tightly

closed. Do not use the kettle if the water level in it is below the minimum

mark on the scale level (0.5 liters).

3. Place the kettle on the power base.

4. Plug the heating tray into a power socket.

5. The kettle switches off automatically after the water has come to the boil.

However, this automatic cutout operates only when the kettle’s lid is close

securely. The kettle’s indicator light will extinguish once it switches off.

6. A further quantity of water can be boiled once the appliance has cooled

down (this will take a few minutes).

7. Remove the plug from the wall socket after use.

Brewing tea/coffee and keeping tea/coffee warm

1. Remove the strainer from the glass pot.

2. Fill the strainer with tea/coffee, and then put the strainer into the glass

pot.

3. After the water boiled, ﬁll in the glass pot within 30 seconds then close the

lid. Please note that water cannot exceed the MAX level on the glass pot.

4. Turn on the switch located on the tray, press the button (O/I) to set the

keep warm function and the LCD displays a default “80 °C”, heater begins

to work. You can set temperature by the «+», «-» buttons between 70 °C ~

90 °C.